Keith S
EHC FREE!!!!
Hi everyone - I need some help troubleshooting an issue. Under moderate to hard acceleration, I get a loud popping sound from the front cylinder. I first thought it was exhaust coming out of the compression release, but they look normal. It just started and I have only ridden it about 4-5 miles since I noticed the issue. No exhaust residue at the exhaust port and I don't see any oil leaks / signs of a blown head gasket although these may have not had enough time to develop.
Background -
I went on a long ride and had an overcharging issue. Melted a fuse so the battery slowly went dead. When the overcharge happened, my tach stopped working. On the way home, I got stuck in traffic and the motor got pretty hot. Dumb decision on my part. I should have shut it down and had it towed home.
I replaced the fuse and checked the ground on the voltage regulator. I also installed a voltage monitor. I took it for a short ride and it was still overcharging, only this time, the fuse was stronger and did not blow. Under moderate to hard acceleration, I got a loud popping sound. Under normal power, no loud popping. At high RPM and no load, there is no popping. I brought it back home to find the bad ground.
I had the battery tested and sure enough it was bad. I also checked all of the other connections. I rode it tonight and I think I have the overcharging issue fixed with the new battery. It was at 12.89v at around 2000 rpms (guessing because tach still does not work). The loud popping still happens under moderate to hard acceleration. I only rode a couple of miles and came back home.
Any ideas are appreciated.
Background -
I went on a long ride and had an overcharging issue. Melted a fuse so the battery slowly went dead. When the overcharge happened, my tach stopped working. On the way home, I got stuck in traffic and the motor got pretty hot. Dumb decision on my part. I should have shut it down and had it towed home.
I replaced the fuse and checked the ground on the voltage regulator. I also installed a voltage monitor. I took it for a short ride and it was still overcharging, only this time, the fuse was stronger and did not blow. Under moderate to hard acceleration, I got a loud popping sound. Under normal power, no loud popping. At high RPM and no load, there is no popping. I brought it back home to find the bad ground.
I had the battery tested and sure enough it was bad. I also checked all of the other connections. I rode it tonight and I think I have the overcharging issue fixed with the new battery. It was at 12.89v at around 2000 rpms (guessing because tach still does not work). The loud popping still happens under moderate to hard acceleration. I only rode a couple of miles and came back home.
Any ideas are appreciated.
