peg adaptor clevises finished and ready for sale.

[cavracer21]

check these pics out of the part with pegs, keep in mind pegs dont sell with clevis's. however they are avalible for an additional fee.

 

[kickstart]

cant find your tracking numbers, but if you didnt get um today and then you should monday for sure i would imagin, i cant believe you havent seen them yet.

The new letter carrier delivered then two blocks over to the same numbers address as mine but the wrong street the people over there were nice enough to bring them over here about an hour ago.
I don't see any tracking numbers on the box so that might explain why you can't find them and for the few cents it costs it would be a good idea.

 

[kickstart]

Your pegs look good and nice work on the adaptors.

 

[cavracer21]

just for info, i might be makin up a couple sets on passenger peg mounts for the style that just bolt thru the single hole in the frame. if anyones interested let me know.

thanx kickstart, sorry about the mix up.

 

[Gas Man]

just for info, i might be makin up a couple sets on passenger peg mounts for the style that just bolt thru the single hole in the frame. if anyones interested let me know.

thanx kickstart, sorry about the mix up.

You might as well. It wouuld allow peeps to have a complete custom set of matching pegs.

 

[cavracer21]

yep, and soon i should also have a set for the k-9s also.

 

[Cutter]

Nice job with the peg mounts(they are MUCH better than "adapters") and I love the pegs Cav, I looked at the same ones but was worried about them draggin?

Let us know how they work out.

 

[alhall88]

Cav I have a set of passenger mounts if you need them but mine are for an 04. I think the only difference is that on the 05 and later models they have a small dowel hole in them.

 

[cavracer21]

so far i havent had any problems with my pegs, but i only have about 50 miles on them. they are wider then the stock ones though, thats for sure. i know that i had do some riggin to make the shifter and brake pegs mount up though, but it wasnt to bad.

al if you could let me barrow that mount to measure it up that would be great, i have a guy that wants a custom set made for an 04. id be interested in your mounts but they wont work on a k-9. let me know though if i can barrow the ones you have though.

 

[alhall88]

No problem I'm off mon and tues then its back on night shift.

 

[cavracer21]

ok, ill pry give you a call tomarrow, thanx man.

 

[P8RIOT]

...I looked at the same ones but was worried about them draggin?

Yeah, Cutter - that was my first thought, too.

I've been dragging my XOPRODOX pegs more often than I want to, and his appear to be even lower.

Of course in my case, it just sharpens the points.

 

[Cutter]

Of course in my case, it just sharpens the points.

They are lower, but shorter so maybe they are not too bad ?

Yeah, my rouletettes have had to be "re-filed" a couple of time to take the burrs off, I am hoping this does not ruin the chrome

 

[cavracer21]

the nice thing about these is the little balls on the bottom they touch before the peg does

 

[P8RIOT]

Yeah, my rouletettes have had to be "re-filed" a couple of time to take the burrs off, I am hoping this does ruin the chrome

The tips on mine are not chrome anymore - but a little careful filing has minimized the problem. I may end up buying another set for "show." These pegs are pretty long, so that aggravates the dragging problem. Like CAV says, the tips of my pegs drag first, unlike the little balls on his. But, if I lift my foot off the peg they fold up nicely and minimize any scraping damage.

 

[cavracer21]

Just so everyone knows, i still have about 5 sets avalible. Let me know if your interested. Hoping to have a limited amount of pass. pegs mounts avalible also. Im goin to be be making some for the k-9 and then some for the single hole mount frames also. i think these are the only styles. am i correct??

 

[Raywood]

My 03 had direct mounts but my 05 had the first of the offsets model CLEVIS KIT (163-000022-00) to clear the pipe. They are not as offset as the K-9 but I may want to use the K-9 style on my bike.
BDM website doesn't allow me to post there pics. But they are under the accessory page.

Later,
Ray

 

[cavracer21]

ok, bare with me on the pass. pegs. the k-9 ones might be a couple weeks out due to other projects.

 

[soonertodd]

hey cav got mine mounted today,the pegs swiveled too far forward.i glued a couple plastic stops on the pegs to correct for now.feel solid,i think i'm gonna drill and tap the pegs and put an overtravel screw in them.pegs wont fold all the way back either,not a big deal i never fold them back.all in all i like the set up a lot better than stock,these pegs should last a hellava lot longer.

 

[cavracer21]

good deal, what pegs do you have, i didnt have any problem with my kury pegs.