Parana Clutch Adjustment

[Magoo]

I need help adjusting the Parana clutch (not parana jr). I've been playing with it and can't seem to get it adjusted right. I took it apart and found no issues, plates look good, housing good, springs good, just won't adjust right for me. :bang: Any help would be appreciated.

 

[seatmaker]

You should be able to find it in here How-To - BIG DOG Motorcycles Forum

 

[Sven]

I'm going to figure out which way my screw turns on any clutch assembly.

1. If I know where my adjust screw is, I am going to hold the clutch lever and have a screwdriver/allen on that adj-bolt: are my positions with both hands.

2. I already have the slack out of the lever until I feel resistance. I am going to turn the adj-bolt in or out.
a. IN = My lever begins to move back to the perch lever assembly.
b. OUT = My lever begins to move to the hand grip.
c. Perch = My movement with the adjust screw is to follow the lever back to the perch, not the grip.

3. I just found my direction is to move the lever back to the perch or move IN until it the adj-bolt stops. Even if it's reversed, meaning, if I move the adj-bolt OUT and the lever move back to the perch, I found the correct direction is follow the lever back to the perch.

 

[Little-Boo]

Piranha Clutch, I think this is a KARATA Clutch, maybe check their Web site for instructions or some kind of help. I know some on here have a Piranha Clutch or a Piranha Clutch, Jr. , they should chime in soon to help you out. I would think the adjustment is the same, but I could be wrong. Depending on the application you have on your bike, it may require a different length rod.

Carlos