Old thuderheart schematics...
- Thread starter fantomaz
- Start date
bdmridgeback
Low Down Chop Shop
Yellow!
Green goes into the EHC as pin position #20 to signal the tach ring yellow wire from the tach ring going into the EHC as pin position #21.
Yellow wire runs in a separate harness and runs direct to the coil and not through the EHC.
Green goes into the EHC as pin position #20 to signal the tach ring yellow wire from the tach ring going into the EHC as pin position #21.
Yellow wire runs in a separate harness and runs direct to the coil and not through the EHC.