Oil pressure gauge

[LHS]

Hey guys and gals I want to put an oil pressure gauge on my 2009 Ridgeback.
I can’t use one that mounts to the rocker box As it will get in the way of my leg. I already have issues with the air cleaner against my leg. So I’m thinking I want to do one that screws into the Tappit screen. I know I’ll have to use one that’s 0 to 60 PSI and not 0 to 100 psi. I seen one on one of Marky Marks videos and that’s kind of what I want to do. I just not sure What brand or what I should get as I’ve heard bad things about the ones leaking glycerin out of the plug That some of them have. I also don’t know for sure what fittings to get. Any input Where to buy and what to get would be greatly appreciated
THANKS

PS
Just another question I see Marky Mark has his own section how come all his videos are not on their he’s got some great DIY howto’s. A guy gets the advantage of his knowledge and some funny entertainment all the same time it’s awesome !!!!

 

[knothead]

Look on jerzee customs web page...they have them and with a 45 degree pipe fitting adapter....i run jerzee guages and so far never had no trouble out of them

 

[LHS]

Checked out Jerzee customs and I’m gonna go with one of their gauges and they’re 45° fitting but I’m still gonna need another fitting to go where the cap is over the tappet screen because the 45° fitting with 1/8” npt isn’t going to just screw In to replace the cap. So I’m thinking I’m gonna have to find a fitting that has the same thread as that cap and screws in to the same depth To hold the screen and spring in place and has an O-ring seal. I looked all over Jerzee customs site and couldn’t find one. Any suggestions? Looked on Derek And Donna‘s didn’t see nothing there either

 

[LHS]

Update found the fittings I need Ordered them should be here by the middle next week

 

[knothead]

Checked out Jerzee customs and I’m gonna go with one of their gauges and they’re 45° fitting but I’m still gonna need another fitting to go where the cap is over the tappet screen because the 45° fitting with 1/8” npt isn’t going to just screw In to replace the cap. So I’m thinking I’m gonna have to find a fitting that has the same thread as that cap and screws in to the same depth To hold the screen and spring in place and has an O-ring seal. I looked all over Jerzee customs site and couldn’t find one. Any suggestions? Looked on Derek And Donna‘s didn’t see nothing there either

Sorry i thought jerzee had them too thats my fault...i know they have it in the gauge kit that goes on the valve cover...gauge hose fitting etc...be a nice addition to the bike when u get it installed