oil pressure gage

[Mr. Wright]

Frank beat me to it. That is called a drag link socket, and works great. You might have to grind the edges of to blade to fit in the slot. Grind it flat, not on a tapper. soak around it with PB Blaster, ATF and Acetone 50/50 mix. Put the drag link socket on a breaker bar, then tap the top of it as you are applying pressure.

 

[woodbutcher]

Interesting, mine has a bolt there.

that's because everybody was destroying the slotted screws. hex is on the later models unless the previous owner replaced the original with the hex. :bang::bang:

 

[txcrod6]

And this is why at the first sign of not being sure I come to my fellow Big Dog owners because I know that they will take care of me n if they don't know they will send me to the right person....THANK YA!!!!

Sent from my SCH-I535 using Tapatalk

 

[jjarkys]

that's because everybody was destroying the slotted screws. hex is on the later models unless the previous owner replaced the original with the hex. :bang::bang:

Gotcha thxs for the info

 

[jjarkys]

And this is why at the first sign of not being sure I come to my fellow Big Dog owners because I know that they will take care of me n if they don't know they will send me to the right person....THANK YA!!!!

Sent from my SCH-I535 using Tapatalk

Let us know what ends up working for you

 

[jjarkys]

Well, did you get it off?

 

[liferider]

My oil gauge. Made a bracket and picked up a new rocker box chrome grade 13 bolt 1/8" longer to account for the bracket.

 

[malow1]

been running an oil gauge for 9 years, pull out the stock oil sender, install a 45 degree adapter then the new gauge, looks sweet!

 

[Mr. Wright]

That's what I did also, but he still needs to get that plug out to clean the screen.

 

[BBChopper]

Interesting, mine has a bolt there.

That's also where your tappet screen is I wouldn't mount shit there! I tied mine into the port that the stock PSI sensor is in!