A
adamthisis
Guest
my oil low pressure light is not coming on when I turn the key on, just was wondering if there was an easy fix or if I need to take to shop.
Fibersnake
Banjo Playing PsychoBilly
Suggest that you disconnet the wire from the OP sender and than using a good multimeter, see if you get continuity from ground to terminal (make sure it is not running). If you do then, more than likely the switch is good for when it is not running, it should ground completing the circuit and causing the light to come on. If you do get continuity when it is not running, start her up but leave the OP wire disconnected but not touching anything, check the continuity from the OP Sender terminal to ground again. If you do not have continuity this time (Open circuit), the OP switch is good.
If I understand, the light is not coming on at all. So if the switch is good, than more than likely, have a broken wire, bad connector or possibly a broken connection on the tach ring.
Have you had your EHC disconnected recently? I broke a pin on one of mine awhile back and it was for the OP light.
If I understand, the light is not coming on at all. So if the switch is good, than more than likely, have a broken wire, bad connector or possibly a broken connection on the tach ring.
Have you had your EHC disconnected recently? I broke a pin on one of mine awhile back and it was for the OP light.
Good recommendations above.
Did you notice any intermitant flashing of the light before? Mine would go on and off especially when I hit a bump in the road and it turned out to be a grounded wire under the tank.
If your's just went out then maybe your sensor went out. If you don't have a dealer close you can take it to your local HD dealer and pick one up.
This was the reason I installed the pressure gauge to go along with the idiot light.
Did you notice any intermitant flashing of the light before? Mine would go on and off especially when I hit a bump in the road and it turned out to be a grounded wire under the tank.
If your's just went out then maybe your sensor went out. If you don't have a dealer close you can take it to your local HD dealer and pick one up.
This was the reason I installed the pressure gauge to go along with the idiot light.
roadwarrior
Member
Check out Jerzee Customs Harley Davidson Custom Chrome PARTS and ACCESSORIES and look at the oil pressure system that is available on this site.
The owner, Greg, is a owner of a K9 and designs and manufacturers the products he sells.
I purchased the oil pressure kit and it is pure quality.
Can't go wrong doing business with Greg
The owner, Greg, is a owner of a K9 and designs and manufacturers the products he sells.
I purchased the oil pressure kit and it is pure quality.
Can't go wrong doing business with Greg