Oil Filter Catch Pan

[Big Ron]

What do you guys use for your oil filter catch pan when removing your filter? Cut out milk jug, rags, ....

 

[BBChopper]

Rags, cardboard, frikin mess!!!!

 

[narow37]

I cut out a laundry detergent jug(stronger) but that doesn't work very well. RevTech has an "oil change helper" but I can't seem to find it for you.

 

[Big Ron]

I thought I saw something the other day from cool tools, cruz tools or something like that that had a plastic formed plate with a cap on the bottom to drain oil spill away from bike. Can't remember where I saw it at and who made it either, but they had one for EVO and TC motors.

 

[Shredder]

Ron,
I use Drag Speciality part number DS-310247, it's a special shaped hunk of plastic made to direct the oil away from the engine and towards your drain pan. Very useful in my opinion.

shredder

 

[titus722]

i drill 2 holes in my filter with a 1/8 inch drill bit one is towards the top for air the other is to drain the oil , into a funnel to a drain pan, workes for me every time

 

[Big Ron]

Ron,
I use Drag Speciality part number DS-310247, it's a special shaped hunk of plastic made to direct the oil away from the engine and towards your drain pan. Very useful in my opinion.

shredder

I'll take a look at that. I have only used a milk jug on the Road King and was looking for a better mouse trap. Thanks for the feed back guys. Keep it coming I'm sure there are other ideas also.

 

[Gas Man]

Drag Specialties DS-310247

 

[BDMCHOPPERFREAK]

Cut out jug

I use 1/3 side and about 1/4 of the bottom of a plastic windshield washer fluid jug. I have a 1" hole cut on the bottom edge and oil drains perfectly into a drain pan. Its works great for me and is always handy.

 

[Chopper Dave]

Drag Specialties DS-310247

This is the one that Gas has.....I also ordered this one from Drag.....:up: only like $15

titus....why don't ya try the K&P Filter....most of us here run them...and of course....Ray has been using them for a few years now :2thumbs:

 

[lee]

Rags, cardboard, frikin mess!!!!

I 2nd that! agree with Dave too on the K&P, but Titus, if you do get one, you should probably put the drill away!!

 

[BBChopper]

I 2nd that! agree with Dave too on the K&P, but Titus, if you do get one, you should probably put the drill away!!

Put the drill down and nobody gets hurt!!!
:roll: :roll: :roll: :roll:

 

[Chopper Dave]

i drill 2 holes in my filter with a 1/8 inch drill bit one is towards the top for air the other is to drain the oil , into a funnel to a drain pan, workes for me every time

titus...here ya go.....K&P Filter.....:2thumbs:

 

[bdmridgeback]

This is the best little gadget!!!! I love it!

 

[reloaderbmg]

This is the one that Gas has.....I also ordered this one from Drag.....:up: only like $15

titus....why don't ya try the K&P Filter....most of us here run them...and of course....Ray has been using them for a few years now :2thumbs:

just got one for the 07 k9 two days ago, !!!

 

[slowrower]

Looks good Reloader ... I cut up a plastic jug that work fine but that sure looks better!!