Oil Cooler ????

[txchopperguy]

Nelson,
Any trouble with the "plumbing" running two coolers? How did you hook them both up?

 

[WB Cycles]

The cooler comes with a long and a short line (feed and return). You use the short line from one to connect the two coolers and the other long line to run back to the filter. You end up with an extra short line in the end.

 

[txchopperguy]

Well that answers that...thanks Nelson!

 

[BBChopper]

Yea that was this first thing I did was the cooler and a pressure gauge. You can tell by the pressure when it’s getting hot. I am changing to Amzoil this week!!! Florida is a hot bitch!! :2thumbs:

 

[reloaderbmg]

The cooler comes with a long and a short line (feed and return). You use the short line from one to connect the two coolers and the other long line to run back to the filter. You end up with an extra short line in the end.

im making up a two cooler set up but went with, y,s in the hoses to split the system , that way oil goes throuh both cooler at half the flow rate [slower the oil flow the more heat you can remove] & the back pressure in the return is lower so the pump does not have to work so hard!

 

[WB Cycles]

im making up a two cooler set up but went with, y,s in the hoses to split the system , that way oil goes throuh both cooler at half the flow rate [slower the oil flow the more heat you can remove] & the back pressure in the return is lower so the pump does not have to work so hard!

Great idea !