no power to starter

[crazyjoe]

I was reading back thru my thread and once again it looks like gasman nailed it!

 

[DRBarnhart]

I was reading back thru my thread and once again it looks like gasman nailed it!

Not to take anything away from Gas but TheDeadOne was the first to say your hand control PCB may be the issue.

Just like to give credit where credit is due...

Dennis

 

[crazyjoe]

Yes I see TheDeadOne did bring that out first, thanks for setting me straight.

 

[AJ SMOOTH]

Tell me if the problem was the wire being severed that runs along the tank. This happened to me also in June. Do to the vibration and possible worn tank mounts, the tank rubs against the wires eventually severing them. What was the problem?

 

[crazyjoe]

I replaced the run/stop switch in the hand controls