No horn, no headlight.
- Thread starter Cavazos
- Start date
What are you doing pushing the horn button? I forgot I had one of those
My 2 cents sounds like a short and hope not EHC. Any maintenance prior or wash the bike? (I know it doesnt rain there) Headlight doesnt work in Hi or Low? Does your running lights come on? Check the voltage off the Battery.
My 2 cents sounds like a short and hope not EHC. Any maintenance prior or wash the bike? (I know it doesnt rain there) Headlight doesnt work in Hi or Low? Does your running lights come on? Check the voltage off the Battery.
RRRUFF
Well-Known Member
Yea something shorting out there. I would start by checking the horn wires from the button all the way back to the horn it self and see if any are chaffed or rubbing together. Also check the head light plug at the bulb. There was a recall on this harness in the headlight due to melting.
Option B: Don't blow the horn!
That thing is an embarassment anyway.
Option B: Don't blow the horn!
That thing is an embarassment anyway.
stlmikie
I wish I had more money.
Cavazos
Active Member
thats what i was trying to ask, but i don't have any light or high beam indicator coming on.
Cavazos
Active Member
This was my first thought, i cleaned all the wires and posts and even put new bolts and still having the same problem. Bike starts fine, runs fine, all lights come on (except headlight) and when horn button is pushed the bike shuts off! :bang:
Cavazos
Active Member
No PDM installed. As far as i know, it's the original EHC. I didn't have any problems with the light or the horn or the bike shutting down like that until last week. I'm researching EHC's right now.
Does anyone know what i should expect if the headlight bulb is completely burnt? May be wishful thinking, but thats what i'm hoping for!
Does anyone know what i should expect if the headlight bulb is completely burnt? May be wishful thinking, but thats what i'm hoping for!
Being that the lights and horn are on the same circuit board on the hand controls, could be your controls got wet and shorted out the circuit board. It did you get caught in the rain or did you bathe the dog. Just a brain fart hope that helps
Carlos
Carlos
Cavazos
Active Member
No water here in NM! But I think I have it narrowed down to the circuit board. Any ideas where to get a new one?Being that the lights and horn are on the same circuit board on the hand controls, could be your controls got wet and shorted out the circuit board. It did you get caught in the rain or did you bathe the dog. Just a brain fart hope that helps
Carlos
.....and on a side note, my wife and I may be going to Harlingen in August to visit family. I'll let you know and maybe we could grab a cold one.
Brew
Troop Supporter
PM bigdogpartsking they might have a left PCB...:2thumbs:No water here in NM! But I think I have it narrowed down to the circuit board. Any ideas where to get a new one?
.....and on a side note, my wife and I may be going to Harlingen in August to visit family. I'll let you know and maybe we could grab a cold one.
Cool let me know when your in town, I'll be leaving for Sturgis on August 4 to 12 August. Should be in the Valley the weekend of 17 August on up.No water here in NM! But I think I have it narrowed down to the circuit board. Any ideas where to get a new one?
.....and on a side note, my wife and I may be going to Harlingen in August to visit family. I'll let you know and maybe we could grab a cold one.
I recently got a left side Circuit board from Shovelheadkicker, he may still have some more. Here is one on e-bay and its new. I paid like 40 bucks so bid at least that if you want to get it.
04-UP BIG DOG LEFT HAND CONTROL SWITCH PCB ALL MODELS PITBULL MASTIFF K-9 BDM | eBay
Carlos :2thumbs:
Last edited: