No fire

[keverett91507]

Put the Vulcan dual coil setup on tonight. Bike fired right up the first time. After a few minutes tried again and nothing. No fire at the plug. When I turn the key on and hit run I have a red light under the seat coming on. Don't know if that has anything to do with it or not. Any help would be appreciated:angry::bang::bang::bang:

 

[Little-Boo]

Put the Vulcan dual coil setup on tonight. Bike fired right up the first time. After a few minutes tried again and nothing. No fire at the plug. When I turn the key on and hit run I have a red light under the seat coming on. Don't know if that has anything to do with it or not. Any help would be appreciated:angry::bang::bang::bang:

Something may have come lose, why not take it apart and re-install make sure none of the wires are grounding out or causing a short. You should have a jumper wire between the two coils that may have come lose. It fired up so we know it works. Never hurts to trace you steps and see if something failed with the install.

Carlos

 

[keverett91507]

Thanks man. Was a short on the power to the coil. Had to remove the tank to find it but it works thank god!