Nitrous Again

[carpetman]

Ok guys; just about got my nitrous hooked up, need a few parts and advise. I'm using a carb plate to spray my mixture its 1" thick so I need to extend the breather bolts ( I think thats what there called) any advice or do you know where I can get these, just a question befor I start looking over the net. I know I'm going to have trouble with the tuning because I already went through a lot befor this add on.The trouble started after I installed the cam ( 600 ) I also have the spike breather mounted horizontal I ended up blocking off half of the vents runs great now. I've heard some talk about the breather screw on the carb is it the allen screw on the left bottom of the carb? Do you just take it out ? Im going to try turning the ibreather vertical this time. Sorry I' m starting to ramble ( I do that alot ). Hey I've got till March 4th to get it right.so just talk about this all you want I'm listening

 

[V]

On the 07 the bolts aren't breather bolts. Just 5/16" NC I believe. The heads breath throught the lines at the top of the heads. There is a large line on the rear witha check valve that can be redirected down toward the ground (mybe between thetrans and engine like the carb over flow tube. and a small line on the front that goes into the manifold.

Yes the allen head screw under the left side is the bowl vent. I belive it is 5/16" NF

Good luck and let us know how long it holds together:2thumbs:

 

[john sachs]

BE CAREFUL............Nitrous can cause MAJOR damage.
Find someone with experience to look over your shoulder,and help you.
John

 

[Brew]

Were you ever able to contact Toadstool? He has NOS on his Mutt...

 

[carpetman]

Thanks for some of the info. The bolts I took out were hollow, and yes I do have what I believe are black hoses from the heads which I beleve are breather hoses. 1 runs to the carb the other is just tucked between the cyl. Is there any way to clean these up?? I thought I contacted Toadstool never got a answer. I'm sure I didn't do something right on contacting him. Still learning this sight

 

[KnotSo]

What NOS system you running?

 

[carpetman]

Thanks for the help John. Every one that sends a reply is looking over my shoulder and I thank everyone

 

[carpetman]

I'm putting the system together myself some from Dynotune and Edelbrock Everything going together great. everything is hidden up front behind a nose scoop all custom fab. going to send pks after all fab is done..