New twisted white plug wires

[Srodden]

I like them !
<a href="http://s1250.photobucket.com/albums/hh529/serodden/?action=view&current=ff1ce08877752ebe48f0da3d9e47b2d8.jpg" target="_blank"><img src="http://i1250.photobucket.com/albums/hh529/serodden/ff1ce08877752ebe48f0da3d9e47b2d8.jpg" border="0" alt="Photobucket Pictures, Images and Photos" /></a>

 

[Blackie]

I went Purple!!! Like the White also:2thumbs:

 

[Trainguy]

They make my 10.4 Taylors look well........:2thumbs:

 

[V]

They look good! Now help them out and remove the downtube stickers

 

[Slider]

They look good! Now help them out and remove the downtube stickers

ouch!

Lacquer thinner gets the goop off good. Everyone should have a can.

 

[Nukeranger]

:2thumbs: Nice

 

[coachk]

Anyone got the site name for Twisted or a link for the plug wires?

Thanks

 

[Blackie]

Anyone got the site name for Twisted or a link for the plug wires?

Thanks

www.crowescustomcycles.com

 

[Nukeranger]

I purchased mine on ebay: twisted spark plug wires | eBay

 

[C00lHandLuke]

Looks good!

 

[seatmaker]

Looks good, if your speedo starts acting up at idle, they're the culprit. Was on mine at least.

 

[Srodden]

Looks good, if your speedo starts acting up at idle, they're the culprit. Was on mine at least.

It seems my low rpm warning is over active on my medallion speedo I think it just started I wonder if I could clean the speed sensor on tranny if it would help ?

 

[mirage814]

easy to install? ( not too mechanical here)

 

[Srodden]

easy to install? ( not too mechanical here)

Well you have to take the coil cover off to get to the coil side to unplug and plug in the new ones

 

[07bigdog]

Low rpm is very active on my Medallion also with stock wires. Use cruise mate to keep rpm up until engine warms up.

 

[Srodden]

I thought I read it was supposed to have a 3 second delay when below 900 rpm if mine drops below its only a 1 second delay wish I could adjust the delay on it

 

[mirage814]

read a forum for the Harley guys and they were having issues also with these wires. Has anyone come up with some answers or talking to the company?

 

[Blackie]

Been running Twisted Wires for over 2 years with NGK Iridium IX plugs. No issues but have heard some guys have had problems. I thinks there are numerous threads on here about these wires vs. issues with them.