New Pipes

[T.Byrd]

Good luck with them my son bought a set for his K-9 and they are a two piece pipe and we could not get them stop leaking even took them to
dealer and they could not get them to stop leaking eather sent them back to hookers.

 

[SKOOTER58]

Leaking where?

 

[Staffy]

Hey scoot - thanks fo rthe posts. Sounds great - Are these 2 piece pipes - at least the part # you bought i.e. for a 300 tire Mastiff/K9? Like what I see and hear now T.Byrd has me thinking....

 

[Chopper Dave]

I was almost thinking about getting a set....but I am going to go with the Stainless Creations pipe...like I wanted in the first place:2thumbs:

 

[T.Byrd]

They are a two piece pipe and they leaked where you put them together. They only give you a hose clamp to put them together with but we bought a motorcycle pipe clamp and could still not get them to quite leaking. They runt my sons forward controls on the right side where they leaked. PM BYRDDOGG he'll tell you more about them.

 

[BigSpenda864]

They sound great.

 

[SKOOTER58]

They are a two piece pipe and they leaked where you put them together. They only give you a hose clamp to put them together with but we bought a motorcycle pipe clamp and could still not get them to quite leaking. They runt my sons forward controls on the right side where they leaked. PM BYRDDOGG he'll tell you more about them.

The Hooker Troublemakers I installed are one piece. I had a Harley Night Rod Special that had the leaking problem you described. I bought a new figure 8 clamp and tightened the crap out of it and they finally stopped leaking.

 

[Staffy]

THANK YOU SCOOT

Did what you suggested - called in my order (only with Tech Support - cust service did not want to take any orders). Got the Darkside (scallop cut) $ 195 a piece - two sets of pipes $ 430 (including shipping) - Thanks Again.

Scoot - What Jets are you running with those pipes?

 

[TEXASDOG]

I bought a set for my 2002 Mastiff. I had to make my own lower bracket because they fit wide tire or right side drive bikes and mine is left side drive. They look and sound great with or without baffles. Bike is much smoother at lower rpm's.

 

[erldawg]

Did the pipes come with the holes for fuel injection sensors?

 

[dingo]

Looking AND sounding good :2thumbs: :2thumbs: !!

 

[SKOOTER58]

THANK YOU SCOOT

Did what you suggested - called in my order (only with Tech Support - cust service did not want to take any orders). Got the Darkside (scallop cut) $ 195 a piece - two sets of pipes $ 430 (including shipping) - Thanks Again.

Scoot - What Jets are you running with those pipes?

I'm running the 76 and 31

 

[bkingjr]

Thanks! Pipes look great!

Will you post Hookers #. I've got to get a set at that price.

Thanks!:up:

 

[Staffy]

Will you post Hookers #. I've got to get a set at that price.

Thanks!:up:

Call either #. With the 866 # its option 7 with the 800# I think its option 5. SPEAK TO TECH SUPPORT - THEY WILL EXTEND A FURTHER DISCOUNT. - Good Luck. (I think the person I spoke to was Rich - he was GREAT)

Hooker Headers
HookerPipes.com

Hooker Headers
1801 RussellVille rd
Bowling Green Ky 42261
866-464-6553

For order status please call Holley Customer Service as 1 800 638-0032. You must have your order ID number.

 

[Gas Man]

Did the pipes come with the holes for fuel injection sensors?

Those could EASILY be added in!!!

 

[RVH]

SKOOTER58 and/or toomanybikes, did you have to adjust the rear peg with this install? I'm still under the weather and haven't installed mine yet but would like to know what, if any adjustments had to be made. Thanks

 

[toomanybikes]

I ended up putting Kuryakyn pegs and clevises on mine to get enough clearance