new headlight for the dog

[churcott69]

I have a new adjure bucket and lens assembly. I want the factory wiring in this bucket how do you get the little tree prong plug apart so i can take the end off and feed wires thru hole in bucket, then push the wires back in the plug end? Thank you so much

 

[blacktopper]

If you have the plastic connector you put a small screwdriver in the end of the connector and depress the the spring inside and pull the wire out of each socket.

 

[Little-Boo]

If I remember correctly, the hole on the bottom of the Adjure bucket is bigger than the one on the BDM bucket. You need to take the Adjure bucket apart and remove the mount from the inside of the bucket. Your problem will be getting the plug through the mount. If you don't know how to take the pins out I would make the hole on the mount bigger. Or buy a tool to take the pins off. I use a safety pin but I know how to do it and its hard to explain which little tabs you have to push in to get the wire to slide out. Sorry

Carlos

 

[churcott69]

one f---ing thing after another... busted the plastic conector trying to get the damn pins out... anyone have or know where i can get one? Thank you

 

[pauldeepsea]

Tony you can order a whole new wiring harness from big dog performance parts that is what I did when I replaced my light with the headwinds light. My wire harness was frayed and the wires were shorting out. I think I paid like 25.oo for the new harness. let me know if you have any problems we have the same bike. best thing I can tell u is to relax when doing work on the bike... trust me I have been in some crazy shit with this bike but always seem to pull through with the help on this forumn or getting someone else to come in and fix my FUCK UP LOL...

 

[bdmridgeback]

Autozone and Advance Auto stock the H4 replacement plugs