pknowles
RETIRED
I was looking at the hinged joint. Same as the round foot rest. Doesn't look like they are designed for a "side load".
NEW BIG DOG MINI FLOOR BOARDS COMING SOON
- Thread starter Motorcycle Parts Man
- Start date
Motorcycle Parts Man
Member
MINI BOARDS FITMENT ON BIG DOG JUST PROTOTYPE
These pics are the boards on a Big Dog and the fitment and finish is just stage 1 prototype, not yet refined or finished.
These pics are the boards on a Big Dog and the fitment and finish is just stage 1 prototype, not yet refined or finished.
Motorcycle Parts Man
Member
PICS ON A BIG DOG MINI BOARDS
These pics are the boards on a Big Dog and the fitment and finish is just stage 1 prototype, not yet refined or finished.
These pics are the boards on a Big Dog and the fitment and finish is just stage 1 prototype, not yet refined or finished.
Attachments
Knuckles
Active Member
Does that bottom point hit on tight turns? Looks as if it hangs down really low. They look really good....even if they do drag be nice on long trips.
How much for a pair? I'll take some for a holiday gift to myself!!!!
Motorcycle Parts Man
Member
BIG DOG BOARDS
The question about dragging , you will be able to remove your clevis and move these around to suit your riding. No cost set up yet , we just advertise these parts we are not the manufacturer. However this is all MADE IN THE USA 100%
The question about dragging , you will be able to remove your clevis and move these around to suit your riding. No cost set up yet , we just advertise these parts we are not the manufacturer. However this is all MADE IN THE USA 100%
They look cool. I think as a passenger set they could be bad ass. Not sure you need a 9" for passenger though might want to go 6?
Black Rider
Active Member
How much is the cost? Where can I get them?
Black Rider
Active Member
Where can i get them?
Black Rider
Active Member
I can not find these on the site. Can you help
Motorcycle Parts Man
Member
UPDATED PICS OF BIG DOG PASSENGER AND DRIVER BOARDES
More Big Dog floor board pics for passenger and driver main pegs replacement , Almost finished neeeds chromeing and final fitment test .
More Big Dog floor board pics for passenger and driver main pegs replacement , Almost finished neeeds chromeing and final fitment test .
Attachments
Black Rider
Active Member
I'm interested.
BigDogBro1
Made in the USA
Nice work but...Sorry, I prefer the clean design without that stuff, that's why I bought a Bigdog instead of a Harley.
Do those floorboards have the ability to tilt/adjust at the mount to match the angle of you foot?
Do those floorboards have the ability to tilt/adjust at the mount to match the angle of you foot?
Last edited:
Motorcycle Parts Man
Member
BIG DOG FLOOR BOARDS
To answer some questions , all motorcycles Harley or Big Dog main pegs will rotate if not tightened properly the floor board mounts just like the main pegs, the boards are mounted to a peg underneath the board, so tightening the the main peg properly is crucial, they can be set at the angle you like ,just use your head and dont drag them set the angle properly just tighten properly and use a litttle blue loctite on your bolts, We dont manufacture these boards we only advertise for the manufacturer, There a few companies selling mini floor boards and they all mount the same way if there a board that replaces a main peg. Cost is going to be in the $350.00 range for a pair, I hope this helps.
To answer some questions , all motorcycles Harley or Big Dog main pegs will rotate if not tightened properly the floor board mounts just like the main pegs, the boards are mounted to a peg underneath the board, so tightening the the main peg properly is crucial, they can be set at the angle you like ,just use your head and dont drag them set the angle properly just tighten properly and use a litttle blue loctite on your bolts, We dont manufacture these boards we only advertise for the manufacturer, There a few companies selling mini floor boards and they all mount the same way if there a board that replaces a main peg. Cost is going to be in the $350.00 range for a pair, I hope this helps.
Motorcycle Parts Man
Member
FLOOR BOARD UPDATE FOR FUNCTION
THE BOARDS CAN BE USED SHORT OR LONG POINT FORWARD, JUST CHANGE SIDES AND THERE WIL BE DIFFERENT BOLT HOLES UNDERNEATH IN MOUNTING AREA FOR 2 DIFFERENT ADJUSTMENTS ALSO, SOON FINISHED CHROME PRODUCTS WILL BE AVAIALABLE.WILL WORK ON FORWARD MAIN PEG AND PASS.PEG MOUNTS:2thumbs:
THE BOARDS CAN BE USED SHORT OR LONG POINT FORWARD, JUST CHANGE SIDES AND THERE WIL BE DIFFERENT BOLT HOLES UNDERNEATH IN MOUNTING AREA FOR 2 DIFFERENT ADJUSTMENTS ALSO, SOON FINISHED CHROME PRODUCTS WILL BE AVAIALABLE.WILL WORK ON FORWARD MAIN PEG AND PASS.PEG MOUNTS:2thumbs:
Not to Hijack the thread,
I sent ya a PM the other day on an exhaust you got up on your website. Wondering if you got it in stock? Or how long they take? Looking at the C4's
I sent ya a PM the other day on an exhaust you got up on your website. Wondering if you got it in stock? Or how long they take? Looking at the C4's
Motorcycle Parts Man
Member
TROTTA EXHAUSTS
Yes , I can get the pipes, call me next Wednesday I will get the cost for you and sell for less then retail no problem, we will be closed until next Wednesday we also have Wire plus WP-374 kits available for 2004 and up carbed bikes.Call me Wednesday at VCW 724-662-0581.
Yes , I can get the pipes, call me next Wednesday I will get the cost for you and sell for less then retail no problem, we will be closed until next Wednesday we also have Wire plus WP-374 kits available for 2004 and up carbed bikes.Call me Wednesday at VCW 724-662-0581.