New big dog harness

[63Shooter]

How would a person be able to pull all connectors after folding in half and get 3” diameter of wires and connectors in a 1” opening ???
I will pay $5,000.00 to the person or the delusional engineer, the thought of this fix. Has anybody put in this RIP kit and able to do that? I need advice besides throwing everything in the trash

 

[63Shooter]

Now if the connectors were attached , then I could see I guy being able to accomplish this. That’s the difference between theory and logic a guy that’s got a piece of paper on his wall that couldn’t wipe his ass with it and a poor guy like me out in the field trying to fix the original screw up. Sorry I just felt like whining.

 

[knothead]

Connectors shouldn't have been put on till the wires where pulled thru the frame

 

[HMAN]

Get some pin tools and start pulling the plugs off. Make sure to take pics so you know whats where. Knots right, connectors shoulda come in a bag, not attatched already. Whatta pia. If you got that from Bigdogisback, send it back. Make em fix their screwup.

 

[63Shooter]

Get some pin tools and start pulling the plugs off. Make sure to take pics so you know whats where. Knots right, connectors shoulda come in a bag, not attatched already. Whatta pia. If you got that from Bigdogisback, send it back. Make em fix their screwup.

Thanks guys

 

[63Shooter]

Thanks guys for the advice
Going to send Tim a email

 

[bigkelk9]

Sooooo…. Ya could do what I did and get rid of all the EHC bs and hard wire ur bike and never have to worry about what every big dog owner has to…. Just sayin lol

 

[Jwooky]

If you tape back the connectors in a staggered fashion so they go through in series, you can feed them through