Needed 2003 Chopper exhaust bracket and mad clown pulley

[Tattooedirish1]

Guys i need the exhaust mounting bracket for a 2003 chopper lsd. For big radius 2 into 2. My old set of pipes didnt have heat shields or baffles but my new set does and they mount differently anyone have a take off laying around? I also need a mad clown rear pulley. I'll give derek and donna a call but wanted to check here.

 

[Mr. Wright]

Derek and Donna have the pulley, I just got one, and their thicker, better built, and Teflon coated, at a surprisingly low price.
I'll check my old pipes for a bracket. Seem to me it was in bad shape, but i'll let you know.

 

[Mr. Wright]

Found it, and it is in pretty rough shape. Your call.

 

[Tattooedirish1]

Found it, and it is in pretty rough shape. Your call.

Awesome. Can you post a pic? I'll probaby take it regardless if its in working order

 

[Mr. Wright]

Sorry, I meant to.

 

[Th3InfamousI]

Derek and Donna have the pulley, I just got one, and their thicker, better built, and Teflon coated, at a surprisingly low price.
I'll check my old pipes for a bracket. Seem to me it was in bad shape, but i'll let you know.

Interesting I always say the 04 they sell on EBay is Teflon coated and wondered why since the Teflon didn't start until 05.

A few years ago I picked up a stick or something and it bent the pulley a little I need to pick up a new Stabby model

Sent from my 831C using Tapatalk

 

[Mr. Wright]

I don't know about the rest, but the last two I ordered in Mad Clown pulley design, from Donna, they had to have them made. Their not stock, and they are a lot beefier. I have two stock ones that are cracked.

 

[Th3InfamousI]

I don't know about the rest, but the last two I ordered in Mad Clown pulley design, from Donna, they had to have them made. Their not stock, and they are a lot beefier. I have two stock ones that are cracked.

That's cool! Yea I always saw 2004 and Teflon coated assumed it was a typo. I'll have to pick one up soon before they are gone.

Sent from my 831C using Tapatalk

 

[Mr. Wright]

I'm still not seeing the picture, so lets try this again.

 

[Tattooedirish1]

Sorry, I meant to.

Looking at it i don't see it working with my big radius pipes. Thanks for posting the pic

 

[Mr. Wright]

Sorry, I miss understood, I thought you were looking for a stock bracket. I think the Mastiff I have in the shop has 2-2 Big Rads, I'll look, and take a picture of it. It might be something I can make, if you want.

 

[Tattooedirish1]

Cool a pic would be great. There are 2 types of mounts. One mounts to the trans and one to the frame. Also my bike is lsd

 

[Mr. Wright]

Hope these help. It's on an 09 Mastiff, rhd. If you need to make one, get the exhaust seated in the engine right, then measure how tall the bracket will be. With yours being a lhd, the exhaust will mount closer to the frame.

 

[Chillin]

Damn them old right side drives anyway

 

[HMAN]

This is one I fabbed for the 04 Pit. VH 2 in 2 Big Radius. If ya think itll work I can upload a blueprint for ya later this afternoon?

 

[Tattooedirish1]

This is one I fabbed for the 04 Pit. VH 2 in 2 Big Radius. If ya think itll work I can upload a blueprint for ya later this afternoon?

That may work. Blueprints

 

[HMAN]

I thought I had posted it before......

http://www.bigdogbiker.com/threads/v-h-big-radius-pipes.64314/#post-631326