need help

[05tejas]

I was cleaning the top of the rocker boxs with a rag and noticed the rubber cover came off in the center of the head. So i reached my finger down in and felt something loose. So I pulled it out and it was the black thing with the spring on it. What is it and should I be worried?

 

[Dezertrider37v]

Sounds to me like it was your compression release. Post a pic of the pieces so we can be sure.

 

[Raywood]

Yep, sounds like one of the compression releases broke. Many threads here on them. You will need a special S&S tool to remove and replace the release.

Welcome to the site

 

[05tejas]

I can get a pic later tonight when i get home. Its a black piece. has a spring around it. Flat head screw driver top. Looks like it also has a retaining clip above the spring.

 

[RRRUFF]

Compression release and like Raywood said you will need a special tool from S&S to remove or a bike shop should have what you need if they will loan it to you. Here is a link.

601711: S&S Compression Release Socket Kit

 

[f-okie]

I need a little help here.. My rear release just broke, and I'm wondering what all do I have to take apart to replace it? And where can I get that tool that is needed?
Thanks

 

[Brew]

You can find them (Tool) on ebay, Amazon or one of our vendors on here ect... Amazon is where I bought mine it was the cheapest going price at the time...

 

[BroadBand]

Been there and done that

Earlier post when mine was in pieces, might help...

Notice the spring on the left pictured CR.

From this thread <LINK>

:flag:

 

[BigDogBro1]

Don't start the engine now because the lower portion of the compression release could fall down inside the cylinder if it hasn't already. It's like replacing a spark plug.

 

[cvegmond]

Does the compression release valves require preventative maintenance to keep them from falling apart?

 

[stlmikie]

I'm not aware of any. There may be a way to oil the occasionally.