Need a suggestion
- Thread starter Driver
- Start date
V
Guru
I say no to tha glow. But a good book on bike wiring is buy a guy named Jeff Zielinski I believe he is part of "Nams" They have custom wired some of the big dogs and make other wiring stuff. The book is " How To: Advanced Custom Motorcycle Wiring" I got it off of ebay for around $25.
Most led set ups I have seen have been just wired to the batt with a switch.
Most led set ups I have seen have been just wired to the batt with a switch.
standuprick
Active Member
I had them on my sportbike(red), they looked good at nite. Lots of compliments. I had alot of chrome on it. Basically, to wire them. The best way is to wire them straight to the battery with a switch. There are two wires for led's pos+ and neg-. Pretty straight forward. One goes to the + side of the battery and one goes to the - side of the battery. Put the switch in the + wire. I solder all my connections and heat shrink them. Ebay has alot of different styles. Pods, strips and series. They are pretty cheap these days and run on almost no current. I think at night your a little more visible with them and that is a safety plus. The down side is you stick out like a sore thumb if your doing something wrong. Thats why the switch is nice
Moespeeds
Well-Known Member
NAMZ . CUSTOM CYCLE PRODUCTS
Jeff wrote a great book on wiring your bike. It goes over the different types of electrical systems, materials, connectors, and has wiring diagrams. Great resource, hit the link above.
Jeff wrote a great book on wiring your bike. It goes over the different types of electrical systems, materials, connectors, and has wiring diagrams. Great resource, hit the link above.
