MISSING: HAVE YOU SEEN THESE BOLTS???

[TrickDog]

Washing up the bike today and noticed the bolts from the key/coil cover are missing. Any ideas were to get some replacement hardware?

TrickDog

 

[firedog19]

Any hardware store should have them. I would get stainless so they dont rust

 

[mark whitrock]

You better replace before you ride again, that the motor mount bolts.

 

[BWG56]

There is a washer under the head also.

 

[Ray]

Any hardware store should have them. I would get stainless so they dont rust

I went to Lowes and got stainless a few years ago and replaced several on the ole scooter ,,, a drop of blue locktite, and they are set


Ray :2thumbs:

 

[SKOGDOG]

What BWG56 said...and the washers are not metal, but some kind of fiber....and they go between the unit and the engine.

 

[kickstart]

For the complete mounting kit

You need:
3ea. 3/8-16 X 1" SHCS Chrome
3ea. 3/8 AN SS polished flat washers
2ea. 3/8 fiberglass flat washers.
Torque to 35 Ft Lbs with Blue Loctite

1 ea. shop manual, all this info is in the manual.

I can fax you the pages if you like, let me know.

 

[Olde Man]

I think you can use a 1 1/4" long bolt for more retention.

 

[TrickDog]

For the complete mounting kit

You need:
3ea. 3/8-16 X 1" SHCS Chrome
3ea. 3/8 AN SS polished flat washers
2ea. 3/8 fiberglass flat washers.
Torque to 35 Ft Lbs with Blue Loctite

1 ea. shop manual, all this info is in the manual.

I can fax you the pages if you like, let me know.

That would be great. But I don't have a FAX. How about scanning and posting to this thread?

 

[BADOG]

Ace hardware stainless

 

[kickstart]

That would be great. But I don't have a FAX. How about scanning and posting to this thread?

No Scanner, snail mail if you like.