Mileage check

PYLOO

Member
I have a 08 Mastiff EFI. It came with a aftermarket speedo that says 6K. After a trip to the Vet. It is very clear it has a lot more miles then that on it. I was thinking with it being EFI. Is there somewhere I can plug in and get the info?
 

woodbutcher

Mr. Old Fart member #145
Staff member
don't you hate when that happens!!!!!???? honest people will get the new speedo reset to represent the actual mileage, semi- honest people will tell you to add xxxxx miles to what's on the new speedo, and then you have the people like the one you bought the bike from. maybe somebody can let you know who, if anybody, has the hardware/software that will read the EHC for you. good luck with it.
 

pknowles

RETIRED
What are the mileage symptoms that makes you think it is more than what's stated. Just curious. There's a lot of low mile dogs a running around for various reasons.
 

PYLOO

Member
The speedometer says 6K. The valve guide were shot in the rear cylinder. The transmission bearing were all shot along with the shafts in the transmission. The rear wheel pulley is also worn out. The rear pulley is what's really makes me think I was lied to.
 

PYLOO

Member
Ya. I am pretty bummed. If I can find a way to prove the real mileage. I aleast having a fighting chance with a lawyer.
 

woodbutcher

Mr. Old Fart member #145
Staff member
did he specify the mileage on the speedo was correct or did you assume it was correct? is it written on the bill of sale/title?
 

PYLOO

Member
Ya. It is written on the title and paperwork we sent to the state when we switched the title over.
 

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
Mileage is stored in the ignition module as well as other info like rev hits. I've posted mine here several times
 

Jwooky

Well-Known Member
There is no ignition module on an EFI bike. You may want to contact S&S to see if any info is stored in the VFI module.
 

PYLOO

Member
I called S&S. I can't pull that info from the VFI. I need to find a tech that has the Big Dog software.
 

Jwooky

Well-Known Member
Good luck with that. Not sure why that is so difficult to acquire. I know several guys looking. You still have the stock EHC?
 

BigDogBro1

Made in the USA
I thought I have pulled that info from our 2007 Bulldog ECMs with the protune2 software. It's in the EHC for sure.
 

PYLOO

Member
I got ahold of Curtis. I'll gonna send him my EHC. He can test it and pull all that info for me and print it out. That works for me!!!!!! Thanks Captain!!!!!!! You DA man!!!
 
Top