Metzler tire scraping on belt K-9

Energy One

BWG56

Guru
Here ya go Brandon, sorry for the delay, I had to run my grandson to the eye doctor. I like the front Shinko also:old2:

IMG_0320.JPG IMG_0321.JPG
 

Brandon Downey

Active Member
Yeah I want to do that mod too. Simply for the sake of it sticking out a little less, well and I identify with being a little sideways haha! And thank you Ker, my inappropriateness is simply unacceptable on this forum lmao!
 

Lone Rider

Member
Out riding on my chopper .jpg I currently have the Avon Cobra A72 rear tire. I was wondering if it is possible to replace mine with a 280mm? and would that allow for a better lean angle? Are there any tires that have a more rounded profile to allow more leaning? So far, I've only seen 300mm tires from Avon, or Metzler; Are there any other tire brands in this size?
Any info would be greatly appreciated. Thanks! in the wind....
 

JeffM

Active Member
View attachment 55632 I currently have the Avon Cobra A72 rear tire. I was wondering if it is possible to replace mine with a 280mm? and would that allow for a better lean angle? Are there any tires that have a more rounded profile to allow more leaning? So far, I've only seen 300mm tires from Avon, or Metzler; Are there any other tire brands in this size?
Any info would be greatly appreciated. Thanks! in the wind....

Stuff that, run the 300.
Just crank her over and twist the throttle.
Besides a narrower tire makes your ass look big. lol
 

Brandon Downey

Active Member
View attachment 55632 I currently have the Avon Cobra A72 rear tire. I was wondering if it is possible to replace mine with a 280mm? and would that allow for a better lean angle? Are there any tires that have a more rounded profile to allow more leaning? So far, I've only seen 300mm tires from Avon, or Metzler; Are there any other tire brands in this size?
Any info would be greatly appreciated. Thanks! in the wind....
There is also Shinko, there are a few pics of 2 different bikes in this thread.
 

chili08k9

I will buy the 1st round
Thanks, How do you shave the rear tire?
I just bought and used the very small Kobalt wood planer from lows, just set it at about .150 and try not to stop, peeled mine off in one strip. if you stop it will leave small chatter marks. I did practice on my old Avon tire first.
 

Nཛ͢ཀཇཧ༏ཧי

... .... .- .. -.
View attachment 55632 I currently have the Avon Cobra A72 rear tire. I was wondering if it is possible to replace mine with a 280mm? and would that allow for a better lean angle? Are there any tires that have a more rounded profile to allow more leaning? So far, I've only seen 300mm tires from Avon, or Metzler; Are there any other tire brands in this size?
Any info would be greatly appreciated. Thanks! in the wind....
I run a 280 Metzeler on my K9. Fit is good (Metzeler runs a bit wide). Corners well.
 
Top