Looking Fuel Tank K9

[mjsk9]

i need help, and the end i will try to cut the tank and cleaning everthing with a specialist company so I will need to repaint the tank again. could anyone tell me the RAL Color number of my Black BD? Thanks!! View attachment 62900

Hi Cesar.... Last week I contacted Big Dog and they provided the paint code / recipe for my K9. You will need to provide the following:
1) Your bike's Vehicle Identification Number (VIN)
2) Multiple pictures of your bike
3) Send you request to: bob@bigdogisback.com
I received a response the day after I sent the request.

I hope this helps... Mark

 

[Cesad]

Hi Cesar.... Last week I contacted Big Dog and they provided the paint code / recipe for my K9. You will need to provide the following:
1) Your bike's Vehicle Identification Number (VIN)
2) Multiple pictures of your bike
3) Send you request to: bob@bigdogisback.com
I received a response the day after I sent the request.

I hope this helps... Mark

Thanks for the info , I sent a email to Bob.

 

[Cesad]

This is the before and after, noe only paint it to finish

 

[KaptinAmerika]

Annnd, that's how it's done.

 

[bdm7250]

http://gastanklining.com

 

[Th3InfamousI]

This is the before and after, noe only paint it to finishView attachment 63096View attachment 63097View attachment 63098

Wow took it apart and welded back together...thats one way to do it!

Sent from my 2PS64 using Tapatalk

 

[KaptinAmerika]

I fail to see any where that the metal needed replacing though as they told you needed to be done Cesar.
Looks to me like it just needed cleaning and relining.

 

[Cesad]

I fail to see any where that the metal needed replacing though as they told you needed to be done Cesar.
Looks to me like it just needed cleaning and relining.

Thanks! Does anyone think that I should give it some additional treatment to protect it?

 

[Th3InfamousI]

Thanks! Does anyone think that I should give it some additional treatment to protect it?

I would coat it with a tank liner, yes. Considering how far you went, you know it will stick good. Also, it would seal any potential leaks from the weld job if there's a pinhole one.

Sent from my 2PS64 using Tapatalk

 

[Jersey Big Mike]

If I had my tank that far apart I would have expanded it to get more gas!

 

[bdm7250]

I would coat it with a tank liner, yes. Considering how far you went, you know it will stick good. Also, it would seal any potential leaks from the weld job if there's a pinhole one.

Sent from my 2PS64 using Tapatalk

Looks like that was all he needed to do. http://gastanklining.com/