Looking For Some Used Pipes

[haze324]

Fellas,

Lookin for some used pipes. I currently have the stock 2n1 on my 03 Pitbull and looking for anything more appealing. Not really worried about losing some HP, I just can't stand the look of the 2n1. I'm on a tight budget so I'm not too picky, anything aside from what I have right now will work.

Let me know
thanks

 

[Oscar Maldonado]

First off - Welcome to the site!

You can find that there are an ass load of pipes out there that you can install on your bike. Some may need a little mod on the mounting bracket but other than that, What exactly are you looking for?

 

[slowrower]

How about the stock pipes

Thanks to GAS .. I bought a set of V&H 2-into-1 pipes from our friendly parts supplier which I think are pretty cool looking. -- I have the original set available Oscar ... I can check at the swap meet in Daytona this weekend - very cheap there! tell me what you fancy and I'll see what I can find.

 

[haze324]

Thanks

Thansk fellas. I was on the other site a bit and had registered here a while ago but just saw everyones here now.

I've been lookin on ebay and asking around. Like I said, I really don't care what the pipes are as long as they are not the stock 2n1 they have now. Since I am on budget and am gonna have to rejet the carb and do a few other adjustments the bike needs I've been looking at some simple exhaust, V&H Short Shots, Samson Street sweepers, etc.

So if anyone has some laying around or know of someone, please let me know and thanks for the welcome.

 

[alhall88]

Haze I will be looking to sell my martin brothers curb feelers, came off my 04 chopper (left side drive). But I need to check on how much longer my new pipe is going to be.Here's a pic of them on my bike.

 

[haze324]

AL

those pipes are sick. I'd be very interested, just gotta make sure the clear my passanger pegs. Let me know!

 

[Chopsicle]

I got a set of Martin Bros (Trend Kills). On my 2004 Ridgeback. They mount via a bracket that uses a bolt on the tranny. I don't know if they will fit yours. They are wrapped also. If you find they fit, let me know. I am going to get a different set pretty soon.

 

[haze324]

I think as long as they are set up for LSD they would fit. I'm not too familiar with tranny mounts though. Trendkills are some sweet pipes, how far down do you have them wrapped?

 

[Gas Man]

I would sell you my scratched up V&H BR pipes... they would be cool if you got them either re-chromed or painted or powdercoated... but the problem is they are RSD

 

[skully]

cheap pipes

want to be diffenant??
if you have the kerker 2n1 pipes, knoff off the muffler part, get a large crusier turn out tip and slip it on. there are all kinds of bolt on frame brackets out there to make a hanger with. again cheap. if you are willing to do the work and use your immagination, you'll now have a nascar car style exhaust. sounds great, looks great. depending on which crusier tip you use the pipe will end before the rear axle bolt or shorter. no special tools required, just a few wrenchs.

 

[skully]

i also have a set of custom after market pipes maring brothers) we might be able to trade for. P.M. me if interested... david

 

[Chopsicle]

sorry for the late reply. work.....

 

[alhall88]

R&B racing 124 challenge pipe (2 into 1) with silver ceramic coating. Also thinking about mounting the air/fuel ratio meter with a rocker box mount gage cup. The front pipe will have a bung in it with a pipe plug that I can remove to add the o2 sensor needed for the gage. If there good on there original quote I should have it within a week or so.

 

[pisssed]

Yaaaa nice choice looking to make some HP'ssssss???

 

[skully]

HAZE,

check your pm about the pipes... let me know

dave

 

[Gas Man]

I got set of punched stock super traps... :lol:

 

[skully]

chris, are they the 2n1 ? i'm looking for the style where the muffler slips off. all i need is the header pipes and the three shields.

dave

 

[Gas Man]

No this is the stock 2:2 pipes