Looking for female JST crimp on wire connectors

[hyperlund]

I am looking for some crimp on JST wire connectors. They are the female type that are used on wiring harness plug in for LED blinkers. I am looking to buy some or information to direct me to a retailer that sells them? Thanks for any help!

 

[ringo]

The RC hobby would be one place to look

 

[BigDogBro1]

Check Digikey

 

[hyperlund]

Thanks. I will look up the sites.

 

[nine lives]

I am looking for some crimp on JST wire connectors. They are the female type that are used on wiring harness plug in for LED blinkers. I am looking to buy some or information to direct me to a retailer that sells them? Thanks for any help!

I've cut some out of an old computer before.

 

[Nukeranger]

Have you looked at Deutsch connectors? They are pricey but that's what I am going with for all my electrical work.

http://www.wirecare.com/deutsch-con...=4&Series=DT&gclid=CMazh6fil6wCFcHr7QodDkooOA

Huw

 

[hyperlund]

I found some on Digi-Key site in Thief River MN. Got 10 connectors for .68 plus freight. Thanks for the help.

 

[Raywood]

I just did mine today. Got tired of that connector and just crimped the plug to the lens with shrink tubing for a solid fit and all is well. Wore the connectors out from removing the rear fender to many times.

 

[Nukeranger]

Digi-Key is a whole lot cheaper than Deutsch Connectors! That's good work there. The cheapest way I have found is to solder, use electrical tape, and then shrink tubing to finish it off. This way the connection will last forever and you can always cut and solder to repair.