Learning experience

Cuz

Member
Learning experience for me LOL
I pulled the rear end of my bike to polish everything up and clean up around starter area.
I bought one can of Wizards from Strokers on Saturday, turns out was not enough. Now Strokers is out and trying to find another Wizards dealer around here is like finding a needle in a haystack. Luckily I know some of the mechanics at Strokers and they pulled enough out of their own toolboxes to get me threw.
I did order two more cans from Vickie, which should get here in a couple of days.
Im just going to order a case of it to be on safe side.
If anyone else knows a place here in Dallas to get over the counter please let me know. I called around and could not get in touch with anyone or they did not sell it.

Laters
Cuz
 

bdmridgeback

Low Down Chop Shop
I sold it and used it in my shop. Call Wizards Direct and they will tell you who all the local dealers are:

Wizards Products
Toll Free (800)356-7223
 

iron mike

Member
how much of that stuff are you using, a little gos a long way. i did my whole bike with a quarter of a can of the cotton candy stuff
 

PROFLYER

SWOLE
No kidding, I'm with Iron, I've done the whole thing more than I'd care to remember and still have quite a bit of the wad left...BMDridgeback had a great post on the other site. You just want to use the stuff in the wadding (basically use the wadding to apply it) and then actually polish with a micro then another clean micro to take it all off....
 

jimizee028

TRUE COLORS COLLISION
:bang: i also agree sure your not confused and polishing your 18 wheeler and trailer,cause thats how much polish they give you,also i dont understand why people would want to waste gas these days when it is a perfectly good option to buy straight from wizards website themselves!!!!!!!!
 

Cuz

Member
Yeah I used more than normal this time..
I sanded down alot of nicks and scratches.
Normally I use it in moderation.
Thx everyone

Laters
Cuz
 
Top