SCC007
Active Member
If one or both of the compression releases are cycling then your EHC is getting signal from the handle bar/ignition switch and the 'upstream' part sounds like it is working fine. Focus on the wiring from EHC to starter making sure there are no issues. Also may want to check that the ground at the starter is good...these things take a lot of juice to turn over and need a strong connection (pos and negative) to spin.
Slam button bypasses wiring from EHC/handle bars but will still need good power/ground to the starter...if you have one it is worth getting everything out of the way to install and with starter open you should be able to identify issues too...install the slam button and see if that works.
Slam button bypasses wiring from EHC/handle bars but will still need good power/ground to the starter...if you have one it is worth getting everything out of the way to install and with starter open you should be able to identify issues too...install the slam button and see if that works.

