K-9 300 Wheel Valve Stem

[Glenn]

I brought my 07 K-9 300 Wheel to may local Indy shop to help them put a new tire on. Unfortunately the bead breaker machine sheared off the valve stem on the inside of the wheel. I need a new valve stem and don't have a clue where to find one. It's a smaller diameter than a typical stem and is held to the inside of the rim with 2 jam nuts. Can anyone point me in the right direction????

glenn:bang:

 

[woodbutcher]

all i can think of is to maybe call stroker's and have them overnight one (or a couple) if they have any. they would be in a later time zone than you and they would still be open. good luck.

 

[outdoorsman26]

did you have your tire repalced at some sort of dealer??

 

[MARV]

its the standard .453 hole valve. purchased at pepboys.

my valve was broke before the taper so i thought it was wide to the end. after checking the front i found its tapered.

its basically this.

Dill Eaton Valve Stem Clamp-In Steel 1 1/4" Long VS-902-CR-50

it comes with an extra grommet if you have a .625 hole

an old thread

 

[Glenn]

Great Idea!!

all i can think of is to maybe call stroker's and have them overnight one (or a couple) if they have any. they would be in a later time zone than you and they would still be open. good luck.

Thanks Woodbutcher! Called them and there are 2 on the way! Great people to deal with!

Thanks for all the responses, I love this site!!

 

[Glenn]

Thanks Marv - good info!!

 

[07bigdog]

Not positive, but i think Summit Racing might also have them. They have a 24 hour phone line.

 

[Fairless]

on its way, Glenn : )

 

[Dozer1]

on its way, Glenn : )

Great job, Lena! :2thumbs:

 

[Fairless]

thanks : )

i do what i can!

 

[Glenn]

GOT IT! and thanks for taking the time to figure out just what I needed! Great people to do business with!