Its that time of the year

[alhall88]

Not much fun this year, mostly maintenance items to do. New tires,brakes,rotors,wheel bearings,neck bearings and races,also checking out the powder coating of my wheels along with a couple other pcs. And of course the rewire as soon as wire plus ships my module.

 

[Mickeetwo]

Looks like your going to busy for a while. :2thumbs:

 

[LARS]

ooofaaa,have fun …drink lots o' drinks

 

[Staffy]

Know that feeling - am right there with you...G@@D LUCK and have FUN :up: :up:

 

[N8KAM]

As soon as i get mine back from Beezers I'm going to start the disassembly for some Chrome work and bearing checks/lube...

 

[Little-Boo]

Yea I am finally doing what I started to do some time ago. Cylinders are in for .045 milling, They should be read by Friday, then they and the heads are going in for Powder coating and diamond cut, some chroming on the belt drive primary, speed housing, odds and ends for now, new cam going in 650 Woods and springs, new S&S Rocker Boxes, Jims chrome tappet blocks with hydrosolid lifters, S&S IST ignition, Gothic Triple Trees, heads have been ported new valve guides, 2.0 intake Valve, 160 Exhaust, new Street Walker 2 in 1 Exhaust. Once Wire Plus send me the kit that I ordered the EHC will be history. I did put on the new PSI Big Air Carb to get it tuned before all this other stuff currently going on. Hope to have the Dog Running by Mid December.

 

[Gas Man]

Getting an early start I see Al.