Interesting Kickstand/Peg Issue

[FrankBDPS]

It was the one missing bolt!!! The one bolt tightened the entire assembly. It acts as counter-lever. Would never have guessed that. Could not find the same chrome 12 point bolt but replaced it with a normal hex bolt and a lock washer. Its under the bike and can't be seen anyway.

Now its back to the sissy bar project!

So what's going on with the sissy bar JR.?

 

[JR03CHOPPER]

So what's going on with the sissy bar JR.?

I got a set of RT struts. The offset is in the front where the struts mount to the frame under the seat. I am fabricating two "spacers" that fill in the gap. Then having them welded to the RT struts and getting them Powder Coated black. Everything else matches up perfect.

 

[JR03CHOPPER]

I should. I just may not have the sissy bar on yet. It is all being done off the bike. So if it gets too close...I'll just keep it together.

 

[JR03CHOPPER]

The difference is about 3/4 of an inch. My current strut is on the left (black and still attached). This shot is looking dowwn the right side of the bike.

 

[Viking]

Jump on that ride and head for Clearwater. We are all leaving the house in about 45 minutes....

 

[JR03CHOPPER]

Jump on that ride and head for Clearwater. We are all leaving the house in about 45 minutes....

I'm at work!!! Lol!!!

 

[Trainguy]

Next time you get under there, take a can of degreaser with you Merry Christmas Jr.

LMAO