Inner Primary Case Bolt Size?

[Utopiapga]

Can anyone tell me if hand what size case bolt I need for the Inner Primary at Position 3 according to the service manual? Says 1/4 or 5/16 but does not give any lengths or details.

Mine keeps comming loose there and I have now lost it somewhere on my last ride all together. Guess I need to get back into habit of checking all of them again after each long ride.

Thanks
Posted via Mobile Device

 

[Utopiapga]

Bump
Posted via Mobile Device

 

[Five Five]

Check the BDPP web site and look at the exploded views should be able to determine size needed

 

[Viking]

The only one that is remotely close to being in the 3'O Clock position is the rear inner primary who mounts to the transmission. That is a 5/16-18 x 1-1/4 bolt, torqued to 16 ft lbs and uses locktite 2440.

 

[Utopiapga]

The only one that is remotely close to being in the 3'O Clock position is the rear inner primary who mounts to the transmission. That is a 5/16-18 x 1-1/4 bolt, torqued to 16 ft lbs and uses locktite 2440.

Thank you! It's not the 3'oclock position but the #3 position according the the service manual. It is the front lower of the two you can see behind the forward control.

But thank you for the help!!
Posted via Mobile Device

 

[Utopiapga]

Check the BDPP web site and look at the exploded views should be able to determine size needed

Thanks bro! I googled it to and only thing that came up was my post here! Lol!!
Posted via Mobile Device

 

[dingo]

Try this.....

2006 Primary Case Assembly – 0″ Offset | BDM

 

[shovelshot]

Thank you! It's not the 3'oclock position but the #3 position according the the service manual. It is the front lower of the two you can see behind the forward control.

But thank you for the help!!
Posted via Mobile Device

You must be talking about the bolt holding the outer to the inner primary. I lost that one several times as well. If I remember it is 5/16-18. I think I bought 1-1/2 or 1-1/4 long.

 

[Utopiapga]

Yes that is the one! Got it fixed!! Easy fix didn't have to remove primary lets hope it holds up better this time but will definately keep a closer eye on it this time!

Thanks for everyone's help!!