Dynalolife
Member
So I bought a 2000 pro sport that has been sitting for 7 years bike fired up and then died riding home and it’s been mission and a half.
Originally the battery load tested bad then I would still get a click. I replaced the starter motor and I would get a crank over and it seemed pretty strong. It wouldn’t start from there forward. So I rebuilt the carb and replaced plugs since the battery was low from the starter testing and the headlights being on I swapped the battery out of my 16 dyna. I rode it around the block then had to run errands and let the new battery for the bike that I purchased sit on charge. I come home reinstall the battery once it shows 12.7 volts I start the bike and get about 200 feet before it completely lost power and the battery had about 4 start attempts without starting. I pushed the bike back in my driveway and am pulling my hair out with this thing. What would you check from this point forward?
Originally the battery load tested bad then I would still get a click. I replaced the starter motor and I would get a crank over and it seemed pretty strong. It wouldn’t start from there forward. So I rebuilt the carb and replaced plugs since the battery was low from the starter testing and the headlights being on I swapped the battery out of my 16 dyna. I rode it around the block then had to run errands and let the new battery for the bike that I purchased sit on charge. I come home reinstall the battery once it shows 12.7 volts I start the bike and get about 200 feet before it completely lost power and the battery had about 4 start attempts without starting. I pushed the bike back in my driveway and am pulling my hair out with this thing. What would you check from this point forward?
