hunt for hardware (see pics)

[ToolHandLuke]

tl;dr
My roommate laid my bike down last month he is doing fine. washed out on gravel about 300yds after leaving the driveway.

most damage is pretty self explanitory and easily addressed (i will make another post looking for someone who can get the dent out of the tank) anyway; upon further exam of the forward controls i find these bolts bent. does anybody have a hardware connection? fastenal and all local shops have proved worthless in the 2 days ive been dealing with this.

 

[Mastiff Rider64]

tl;dr
My roommate laid my bike down last month he is doing fine. washed out on gravel about 300yds after leaving the driveway.

most damage is pretty self explanitory and easily addressed (i will make another post looking for someone who can get the dent out of the tank) anyway; upon further exam of the forward controls i find these bolts bent. does anybody have a hardware connection? fastenal and all local shops have proved worthless in the 2 days ive been dealing with this.View attachment 77249

You need to contact eric from HDM. Their website is
Www.bigdogbikerkingpin.com

 

[ToolHandLuke]

Yeah. Ive got them on lockdown...i am going to double triple check, but i didn't see anything about hardware on the site

 

[woodbutcher]

their site would be 3 times bigger if they listed all the hardware they have available and all it would be is a bunch of pics that nobody would recognize anyway. talk to them and they should be able to tell you ya or nay.

 

[ToolHandLuke]

Yeah. Good call. I'll hit them up in the am. (Darn the luck, I already have an order comming from earlier in the week)

 

[Drdave427]

They will get it to you FAST !!!

 

[Mastiff Rider64]

Yes, you would be surprised at all the stuff they have not listed on their website. I recently found my pivot shaft on an 06 Mastiff broke in half. Not listed on their site for my bike, called Eric a day or 2 later its in my mailbox and now listed on their site. I even found the pivot bolt bearing order a set of those, and Eric helping me thru all this (because hell I normally dont work on my own bike but after a few times recently being screwed over by shops has me now learning on the go) he sent me a small washer/spacer that goes between the frame and pivot bolt bearing. Never would have thought about that being something they would have, I had planned on using the old one, but nope Eric thought ahead and sent it.

 

[Mr. Wright]

If you want to run that tank over Carlsbad, NM on the evening of the 22nd, You can buy me that beer, and I'll take that tank home and fix it for you.