Horn Relay

[gbspear]

Does anybody know where the horn relay is. I have a gray wire hanging close to the horn. I think it goes to the horn relay.
Any information would be much apprieciated.

 

[bdmridgeback]

Horn relay is built into the EHC. Gray and black wires come directly out of EHC and go to the horn.

 

[gbspear]

Are they both connected to the positve side of the horn

 

[V]

I don't have the 04 schematic but mine shows a red +, a black - and a gray going to the relay. Then from the relay a red + and then a black - from the battery to the horn. Typically the gray would go to the relay and your horn button does the activation to the relay thru the gray wire. Hope this helps

V

 

[gbspear]

Don't have a red wire, grey is not hooked up, reconnected black wire to positve side of horn but did not notice any hook up for grey wire. I knew black wire was hooked up to positive side of horn due to flattened wire and terminal end to positive side of horn. I just need to verify grey goes to positive side of horn.
Thanks
Gary

 

[V]

Have you traced the black wire back to make sure its not the ground or negative? Typically the black is the ground. Also if you have a DC meter you could hook it to the gray and hit the button to see if thats sending the positive + current. Could also do the black if you can not trace it back.

LITTLE HELP HERE

 

[gbspear]

Their is a black wire still connected to the frame and horn, unless both the wires go together and posiabley only the grey wire goes to the positive side ???

 

[V]

I would say the gray to the positive. Would be good to check with a meter first if possible:2thumbs:

V

 

[gbspear]

V thank you for all your help grey goes to positive and it is working fine.

Thanks
GB