Help with transmission oil seals and leaking

Energy One
Knine

Knine

Member
Dear Friends, I have an oil leaking in the transmission in my 2007 K9. After looking some information with a technician in Lima Peru, he found some diagrams and told me the parts I need are 13, 14, 29 and 72 in the attached diagramas to this thread, which correspond to the following description :

13 Oil Seal
14 Quad Seal
29 Gasket, bearing door
72 Main drive gear seal.

Please, can you put an eye in the diagrams and tell me if there is an HD equivalent or where can I find the original parts. BDMP doent show this items in the on line store.
 

Attachments

W

wyatt580

Well-Known Member
wheres it leaking 13 & 14 come together and you can get them at hd...there are threads on here that tell the part #...if i get time later i will try to look it up...common leak spot easy fix also when you pull 16 there is a little plug that sometimes back out..this might be allyou need depending on where its leaking..13-14 are 9-16.00 dollars depending where you get them most hd shops have them...peace hope this helps
 
brhanson75

brhanson75

Member
Just did this to my 08. I replaced 13, 14 and 15. once you get off the sprocked which is reverse thread and remove spacer 15 you can pop out the seal with screwdriver or whatever you want. I thought it was easy and do it yourself. The spacer 15 is most expensive and could be reused but part of it is in the seal and part is exposed so I just put in new so it wouldnt ruin the new seals. Once I removed exhuast "so maybe new exhaust gaskets" I pulled the clutch cable assy staight out and had enough play in cable to not mess with that at all. There is a great how to on forum for help. Good luck
 
Knine

Knine

Member
Thanks Brian, If you know the HD code part for the # 15 part, spacer pulley, please let me know. BDPP suggested to contact Baker but its web is not available at this time. Thanks again.
 
J

Jack Bauer

Member
When you had the starter off, did you use a BDM O-ring? You can't use a Harley O-ring, it will leak! Tryed 3 Harley O-rings...then got BDM O-ring and it quit leakin', Jack. Do you know which EHC Retrofit Kit is better? BDM or Wire Plus? Please, anyone, let me know, as I need to order one right away, Jack. Please, call and let me know, 480-837-8281
 
05 old dog

05 old dog

Well-Known Member
13 is HD 12067B.........14 is HD 11165......steel spacer is HD33344-94....1 7\8 nut left hand thread....torque to 55-65 ft lbs.
 
Knine

Knine

Member
HI Jack, fortunately you are in US when you have many options. I am in Lima Peru and it is very hard to me find BDM parts or even Baker parts On line or telephone service is not good enough for me.
 
You must log in or register to reply here.
Top