Help please

[BlackNChromeK9]

Took the back wheel of the K9 Ik the wide space goes on the belt side. The two smaller spacers on the rotor side. Problem my tire is rubbing my belt now. First thing I want to make sure is the thicker of the small spacers I have on the out side of the caliper. Wit it has a little lip like the wide spacer on the belt drive side. Is this right. Should I just use the adjusters to turn the wheel so it's not rubbing the belt

Sent from my HTC Desire 610 using Tapatalk

 

[HMAN]

Spacers with lips go towards the bearings on both sides.

 

[francoblay1]

Spacers with lips go towards the bearings on both sides.

What Harry says!

 

[BlackNChromeK9]

Ok thank you, I will flip them around the caliper is rubbing the rotor is that caused by the spacers

Sent from my HTC Desire 610 using Tapatalk

 

[Brew]

Maybe this will help you:
The spacers are #s 87, 88 and 89. 87 and 89 have a bevel on them that go against your bearings which are numbered as 86. Spacer #88 goes between your swing arm and the brake caliper bracket.

 

[BlackNChromeK9]

That will work appreciate help everyone

Sent from my HTC Desire 610 using Tapatalk