Help please no spark on 04 Mastiff
- Thread starter bkfalcon
- Start date
ChoppaNoob
Active Member
No spark to either plug ?
brand new battery just bought, got power at cpu unit module, voltage at coil but no spark battery is good it cranks and cranks but will not start,
Your has a cam senor, if you are not getting spark it could be the cam sensor and or the Ignition module. That is where I would look next :2thumbs:
Carlos
is there a difference between a cam sensor, and a crank sensor?Your has a cam senor, if you are not getting spark it could be the cam sensor and or the Ignition module. That is where I would look next :2thumbs:
Carlos
2004BC
FREEDOM!!!
If your an 04 you probably have a 107 so check your Thunderheart to see if the light flashes on and off as you crank the bike. If not take off the small round cover next to your right foot on the engine and see if your cam sensor is burned, smells bad, or damaged. Start there.is there a difference between a cam sensor, and a crank sensor?
cam sensor was badYour has a cam senor, if you are not getting spark it could be the cam sensor and or the Ignition module. That is where I would look next :2thumbs:
Carlos
bigdogtech01
Well-Known Member
Replace it with a Twin Tec Kit. Drag Specialties part number is 2101-0242.... Retail for $389.95...Just put one of these into an 04 chopper I'm working on. Used a lot of these and they work great.cam sensor was bad
yep it was the cam sensor changed her out and she fired right up!Your has a cam senor, if you are not getting spark it could be the cam sensor and or the Ignition module. That is where I would look next :2thumbs:
Carlos
well it wasnt burned or damaged that i could tell but replaced it and she fired right up.:lol:If your an 04 you probably have a 107 so check your Thunderheart to see if the light flashes on and off as you crank the bike. If not take off the small round cover next to your right foot on the engine and see if your cam sensor is burned, smells bad, or damaged. Start there.
Good news!!! Glad you have it up and running now.
if the new cam sensor is smelling hot is there a problem behind it or is this normal? :loony:Your has a cam senor, if you are not getting spark it could be the cam sensor and or the Ignition module. That is where I would look next :2thumbs:
Carlos