bigdawgj919
Member
I NEED A TRUE BIG DOG MECHANIC IN THE NORTH JERSEY NYC AREA! 06 K9 HAS THE FOLLOWING ISSUES. I REPLACED EHC WITH GEN II RIP KIT. I HAD AN HID KIT IN THE BUCKET. THE WIRE SNAPPED OFF THE RESISTOR. TOOK HER TO GET DYNO'D BY A BIG DOG DEALER IN SLOATSBURG NY BECAUSE SHE WAS RUNNING LEAN. HE ALSO REPLACED MY SPEEDO UNIT WITH A USED ONE AS WATER DAMAGED THE ORIGINAL. DYNO TEST SHOWED IMPROVMENTS ON PAPER BUT SHE STILL SPUTTERED PARTICULARLY AT 3100 RPMS. NO, I DID NOT GO BACK TO THEM AS I FOUND THEIR WORK UNACCEPTABLE. LOOSE PARTS I.E. THE SPEEDO HAD NO RETAINING SCREW AND FELT IMPROPERLY FITTED. SAME FOR THE HEADLIGHT RINGS... WELL I STARTED GETTING ELECTRICAL FEEDBACK SPARKING AT DIFFERENT LOCATIONS. MY STARTER WAS GIVING ME ISSUES, OPEN IT UP CLEANED THE INSIDES REPLACED THE BRUSHES, NO SOLENOID PLUNGER AND CONTACTS. NEW BATTERY CABLES. ADDED A SLAM BUTTON BECAUSE THE STARTER BUTTON AND HEADLIGHT BUTTONS NO LONGER WORKED. THAT WORKED FOR A WEEK. LAST TIME SHE STARTED THERE WAS A BRIGHT FLASH FROM THE STARTER AREA. SHE'S DEAD NOW OH AND DID I MENTION THE OIL LEAK FROM THE REAR HEAD WHICH SEEM TO HAVE A BAD COMPRESSION RELIEF VALVE?
