Has a leak between the pully and tranny

phatchopper300

phatchopper300

I just wanta ride
Went to Fall bike week in Myrtle Beach and before going I noticed a very small leak. It was behind the pully and next to tranny. Went to fall bike week anyway did about 650 miles total on the trip. Bike ran great but did have a little spray back of tranny oil. Here is what I found. Old quad seal and spacer on top and new on bottom. Man that quad seal was shot.



Main shaft was tight no movement at all and bearing look good also.


All is good now!
 
Last edited:
Brew

Brew

Troop Supporter
Where did you get the parts? I think that's what's happening to me now. Little leak down the frame behind the oil tank lines.
 
phatchopper300

phatchopper300

I just wanta ride
Brew said:
Where did you get the parts? I think that's what's happening to me now. Little leak down the frame behind the oil tank lines.
Click to expand...
I did a search on here and found the quad seal and oil seal are HD part #'s. I did replace the spacer due to the scoring and nicks on it. The quad seal HD# 11165 and the oil seal/ main shaft HD# 12067B. The pully nut is left hand and is
1 7/8" socket. I don't have the spacer # but I am sure HD will know what you need. It took about 1 1/2 hours. Hope that helps.
 
dnespolo

dnespolo

Active Member
Maybe I have the same problem, I have some tiny oil leak somewhere on the right side of the bike that I can't understand where it come from, but it make my back wheel dirty and even the right side of the tire get all oily. Does that happen to you too? Or my leak is something different?
 
aspen874

aspen874

Well-Known Member
Denny, one of the easy things to check is your transmission drain, I have a leak on mine, can't seem to fix it correctly
 
Macdwn

Macdwn

Active Member
Kevin with baker drive train is a member on here. Any probs just shoot him a pm he'll point you in the right direction. Helped me a lot with the seals on the otherside of the Tranny for me.
 
phatchopper300

phatchopper300

I just wanta ride
dnespolo said:
Maybe I have the same problem, I have some tiny oil leak somewhere on the right side of the bike that I can't understand where it come from, but it make my back wheel dirty and even the right side of the tire get all oily. Does that happen to you too? Or my leak is something different?
Click to expand...
Yep- I would check behind the pully cover and under it for brown or dark oil.
 
phatchopper300

phatchopper300

I just wanta ride
PurpleDog said:
Good info, appreciate it; sounds like I'm going to be needing a new socket...:eek:
Click to expand...
Yea I didn't have a 1 7/8ths socket got it at Tractor Supply. Inpack wrench took the nut right off. Simple fix just had to take off pipes and loosen back wheel after I got the pully nut loose to get slack to get it off the pully. Pulling seals was a piece of cake. Make sure your spacer is not scored or has dents in it. I just replaced mine.
 
hoat

hoat

Well-Known Member
phatchopper300 said:
I did a search on here and found the quad seal and oil seal are HD part #'s. I did replace the spacer due to the scoring and nicks on it. The quad seal HD# 11165 and the oil seal/ main shaft HD# 12067B. The pully nut is left hand and is
1 7/8" socket. I don't have the spacer # but I am sure HD will know what you need. It took about 1 1/2 hours. Hope that helps.
Click to expand...
I need to do this and I needed part numbers! Thanks

If you had that spacer p/n that would be the perfect trifecta :flag::2thumbs:
 
phatchopper300

phatchopper300

I just wanta ride
hoat said:
I need to do this and I needed part numbers! Thanks

If you had that spacer p/n that would be the perfect trifecta :flag::2thumbs:
Click to expand...
I will get the spacer pn# shortly. The spacer price is around $27 both seals were about $9 total. No more tranny leaks :up:
 
You must log in or register to reply here.
Top