Hard Clutch 06 K9

Captjohn

Captjohn

Member
Purchased 06 K9 about a month ago. Clutch lever is extreamly hard to pull in. Guy I bought it from said it's been like that since he bought it.(imagine that) Clutch engages fine, just hard to pull. Any ideas before I start digging. I'm wondering if it might be as simple as lubing the cable.
 
pknowles

pknowles

RETIRED
These clutches are quite a bit stiffer than most Harleys. It seems like you could feel the drag if it was a cable. There is a great how to on here for servicing your bike. do a search and you will be amazed at the amount of time that some of the members have put into these how to threads.
 
francoblay1

francoblay1

The Spaniard
pknowles said:
These clutches are quite a bit stiffer than most Harleys. It seems like you could feel the drag if it was a cable. There is a great how to on here for servicing your bike. do a search and you will be amazed at the amount of time that some of the members have put into these how to threads.
Click to expand...
:iagree: Click on the link in my signature block and it will take you direct to the "How-To" Section.

Not sure why your clutch is so stiff with so little info but this is a good Thread too: http://www.bigdogbiker.com/forums/how/2025-how-adjust-your-clutch-05-newer.html

Keep us posted on your findings :cheers:
 
bruce

bruce

Active Member
My 2006 K9 clutch lever was pretty hard, but while in warranty I had some problems and they installed a easy pull clutch and it was better. I now have a EFM clutch assem. and it takes no effort at all.

SORRY THAT NOT MY CLUTCH ASSEM.


THAT THE EFM ASSEM.
 
Last edited:
KaptinAmerika

KaptinAmerika

Guru
I just picked one up from a generous forum member and can't wait to get it installed.

bruce said:
My 2006 K9 clutch lever was pretty hard, but while in warranty I had some problems and they installed a easy pull clutch and it was better. I now have a EFM clutch assem. and it takes no effort at all.
Click to expand...
 
You must log in or register to reply here.
Top