Harbor Frieght Chocks numbers

[Rottweiler]

Ok got a HF cycle lift . Got a 2004 chopper looking for a chock that won't hit my fender. Does anyone know which one is better?

• Quick View
  Motorcycle Wheel Chock
  Item #69026

• 
  Motorcycle Wheel Chock
  Item #60392

1800 Lb. Capacity Motorcycle Stand/Wheel Chock
Item #61670

1800 Lb. Capacity Motorcycle Stand/Wheel Chock
Item #97841

Bottom of fender is about 6 inches off the ground.

 

[Little-Boo]

I use a Condor on my Lift and Trailer as well. It does not hit the fender. There are several out there some not as pricey as the condor

Carlos

 

[BWG56]

I have one of the bottom 2, and its works great and clears my fender on my Mastiff without having to modify.

 

[Rottweiler]

Thanks Ker

 

[Chillin]

I've got a Harbor Freight like the first one on a tilt trailer, I have the same one on my lift
HOWEVER I removed the lock-thing. I haven't put one in my enclosed trailer yet but there
won't be a lock in there just good tie downs.

 

[HMAN]

I'm using the 026 on both trailer and HF lift table. With the table it would be helpful to be able to put the kickstand down to allow the bike to stand for tie downs.....I gotta make a widget! In the trailer I have a 4x4 block of wood for the kickstand.

 

[BWG56]

I'm using the 026 on both trailer and HF lift table. With the table it would be helpful to be able to put the kickstand down to allow the bike to stand for tie downs.....I gotta make a widget! In the trailer I have a 4x4 block of wood for the kickstand.

With either of the bottom 2, you can get off the bike without the kick stand down and it will hold the bike upright.

 

[HMAN]

With either of the bottom 2, you can get off the bike without the kick stand down and it will hold the bike upright.

Yeah well, they are already bought and I'm a cheap bastard too....lol. I got a piece of scrap aluminum at work and I'll whittle out a kickstand rest while I get paid.....lol.

 

[BWG56]

Yeah well, they are already bought and I'm a cheap bastard too....lol. I got a piece of scrap aluminum at work and I'll whittle out a kickstand rest while I get paid.....lol.

When ya whittle the kickstand rest out, it might be a little long if you make it as thick as the 4x4, I believe it will hit the license plate holder

 

[HMAN]

When ya whittle the kickstand rest out, it might be a little long if you make it as thick as the 4x4, I believe it will hit the license plate holder

Its gonna be bolted where the wood block is in the pic. It will be about the same width as the KS pad so I dont see any clearance issues. I'll post up a pic when its done....maybe? Lol.....

 

[Th3InfamousI]

Its gonna be bolted where the wood block is in the pic. It will be about the same width as the KS pad so I dont see any clearance issues. I'll post up a pic when its done....maybe? Lol.....

I still don't know why you need it? Seems unnessary with a proper chock.

Seems like this hunk of metal gonna be in the way draining your primary and pulling cover off

Sent from my 831C using Tapatalk

 

[HMAN]

I still don't know why you need it? Seems unnessary with a proper chock.

Seems like this hunk of metal gonna be in the way draining your primary and pulling cover off

Sent from my 831C using Tapatalk

Probably, but like I said, they are already bought and Im a cheap bastard, so I gotta make do...

 

[Th3InfamousI]

Probably, but like I said, they are already bought and Im a cheap bastard, so I gotta make do...

Oh I assumed you had the bottom one ...whoops

Sent from my 831C using Tapatalk

 

[BWG56]

We need to set up a go fund for wheel chocks for HMAN

 

[cdogg556]

We need to set up a go fund for wheel chocks for HMAN

What about me wanker!

 

[BWG56]

What about me wanker!

Get in line

 

[HMAN]

One more drain hole for the oil filter n this lift will be done.

 

[Rottweiler]

Well just got the very bottom one today use a 25% off coupon only $45 bucks. If I get off my lazy ass and make a ramp someday, I might be able to get bike on and off by myself.

 

[liferider]

Come on Rottweiler, just do the burn out up the ramp!

 

[BWG56]

Looks like ya shoulda made the bus barn a little wider, or is it time to add on?