gearing

[delly2]

hey has anybody tried to change the front sprocket on the bd baker trans , i was gonna try to go down one or two on the front pulley to get a faster accelleration,low end power..does anybody know if you can change it? ive done this on my sportbike and its the cheapest most noticeable horse power you will ever get..jim

 

[pisssed]

pulley gives You horse power...hmmmm that an interesting idea?

 

[delly2]

well let me refrase that ,it just makes you take off faster and get thru the gears alot quicker,so in a way it feels like extra h.p..kinda like a car ,2 cars with the same power under the hood,but one with a set of 308 gears and the other with a set of 410 gears,well the 410 is gonna smoke that car in the 1/4 mile..you gain lowend and give up topend speeds

 

[05chop]

Delly Your right you gain torque. Baker has them i dont have link though. Are you planing on staying with the belt?

 

[05chop]

Here you go. I have talked to them a long time ago said they have them for the bdm belt drive BAKER Drivetrain | Gear Ratios

 

[delly2]

yeah was gonna stay with the belt,was just looking to drop a tooth or 2,that would put me off the line and thru the gears fast,i believe the ratio works,1 down in the front equalls 2 up in the rear..ill have to contact baker thanks