front signals out

Energy One

myanoch

Active Member
Anyone have this problem
I have 2009 coyote
I noticed that both of my turnsignals and running lights in the front are out
see on the ehc that its giveing a fault ( flashing lamp) when I put turnsignal on
Any ideas would be appreciated
 

Eric

Banned
track the harness down from each light to the ehc.. you may need to remove the tank.. it could be a pinched wire or could be a warn wire grounding out.. you'll just have to trace it down.. check where the wires go through the lamp housings also..
 

myanoch

Active Member
The problem with the wiring is that each one has its own line and also its own for turnsignal
Thats 6 wires counting grounds
I guess I should pull he tank
Checked wires at ehc looks good
I was wondering if one leed board goes will it nock out the other or cause ehc to trip out
 

myanoch

Active Member
I just check the leds swithched to the back both worked
no power going to eather leg up front
pulled plug of ech put some dielectric grease see no problems
going to rip the tank off check the wires
I just hope it is not ehc
still under warranty but a hassel to take in
Going back let you guys know whats going on
Thanks for help
any more idea let me Know
 

Eric

Banned
yep under the tank.. I didnt think it would be unpluged though.. glad you found it.. now while the tank is off dielectric greese all those connectors.. & shrink wrap em that way it wont happen agin..
 

Brew

Troop Supporter
That's one good thing about the idot lites on the EHC. Glad that you found it. Always a nice fix when it don't cost money...:2thumbs:
 

myanoch

Active Member
Thats for sure
Caught me off guard
I was working on cable and phone problems today turned out to be cable co. problem
must be my one free day of fixing shit
Boy tomorrow is going to cost if today was good

Nice having lights again
no wonder people were looking at me some times making a turn at an intersection with cars coming at me
Taught them were looking at bike
go figure
 
Top