chris maxx
Member
yeah it handles ok, but,, i'm an ex crotch rocket guy so handling?? lol....thanks for response...chris
FRONT END QUESTION?
- Thread starter chris maxx
- Start date
Jersey James
Jersey James
I have an 03 Pitt, to which I added 2 1/2" or 3" (I forget) forks by Frank extended fork tubes. Just measured my bike and between the top of the lower legs to the bottom of the lower tree is 8 3/4" Your bike appears to have longer fork tubes AND more rake. IMO looks Great...Also your lower legs appear to be longer than mine, as the top of my lower legs are about even with the top of my front fender. With mine you really can't tell much of a difference unless I was parked along side of another 03 Pitt. Always felt like I should have gone with a four inch extention.
Last edited:
chris maxx
Member
thanks ,,,can i see a pic or two?
Hardtails the oil tank is on the bottom and the suction line is in the back right rear of the oil tank. Raising the front end won't impact it, actually the problem with the hardtails is quick stops the oil runs to the front of the tank.
Sent from my 2PS64 using Tapatalk
thanks, Eric. I thought the lines came out of the front of the tank. good information.
Jersey James
Jersey James
Chris Maxx.Hope this photo gets posted, and is somewhat helpful. Old Guy, not too computer savy…
Attachments
Last edited by a moderator:
chris maxx
Member
thats sweet, hey im gonna change my bars.. what is the rise and pullback on your setup? and how wide are they? thats just about the look i want for my bars..thanks chris
Jersey James
Jersey James
Chris. As far as I know, the handle bars are stock 03 BDM Pitt Bull. Mine have the optional tach mount. They are once piece pull back riser/drag bar type, best description I can think of.
