Forking by Frank
- Thread starter HMAN
- Start date
KaptinAmerika
Guru
I haven't but here is something to compare it against.
Fork Tubes
Don't know what the Mastiff length is but I know I can get them for the same prices.
Fork Tubes
Don't know what the Mastiff length is but I know I can get them for the same prices.
Mine are 26 1/4 inches end to end. Are those prices for a set or each??
KaptinAmerika
Guru
So that should be +2" then.
Fork Tubes
They are priced Per set not including postage.
Your a supporting member so you would see 10% off that if your registered with Wild Steed Worx already and I have your account upgraded.
Fork Tubes
They are priced Per set not including postage.
Your a supporting member so you would see 10% off that if your registered with Wild Steed Worx already and I have your account upgraded.
What length do I need for my 2006 K-9 ? I put the rebuild kit you sent me in yesterday, but found this on one of the forks. I buffed it and it works fine but at the next service I want new tubes in as well as new head bearings. Heading to Daytona in the morning so needed the bike back together for now....
Attachments
KaptinAmerika
Guru
Thats a bummer but these steep angles on our BDs do wear the hell out of fork tubes.
You would need these:
Fork Tubes
We have the bearings and races available also.
Very good, I had a suspicion about 12" over but wanted to make sure. If your head bearings are Timken I need a set of those as well. But how in the world does one replace the race (L44619) on those?
KaptinAmerika
Guru
They are Timken
On K9 you pop out the cup and then press out the race.
I'm getting ready to put a cool tool on our site for just this task.
It will press races out on welded cups and press out the cup on non-welded cups
On K9 you pop out the cup and then press out the race.
I'm getting ready to put a cool tool on our site for just this task.
It will press races out on welded cups and press out the cup on non-welded cups
Sign me up for one of those tools. :2thumbs:
Went 6" over and used fbf tubes. Bolted right up, Threads perfect. sanction tube hardware fit fine too. He's still top dog. Buy with confidence.
Dam good price guys. :2thumbs: I have ordered tubes from J & P Cycles and paid way more than what the Curtis asking for a chrome set. :2thumbs:
Carlos
KaptinAmerika
Guru
Race Removal Tool
Will not work with races in removable cups only works where cups are integral part of frame. Will remove Race cups though.
It in screws. Use a rubber strap wrench. Before assembly clean the threads and put anti-seize on the threads. You should clean them out regularly especially if you ride in the rain
Sent from my DROID RAZR using Tapatalk 2
Jersey James
Jersey James
I have used Frank's forks, since the early 70s, NEVER a problem, and good folks to deal with. I am currently running a pair of his tubes, on my Pit Bull, fit and finish ~ PERFECT...