Fork seal finder

[Jdog117]

Where can I find a fork seal kit for my 05 chopper? I found some 41mm seals, but then comes the question; What size exactly? 41 x ?? x?? And do they come as kits with all the dust seals and such? :bang:

 

[bruce]

I got mine from biker dream in Atlanta. they send to me in PA. I no Harley seals will work not sure which ones.

 

[Jdog117]

Thank you Bruce.

 

[PINKY]

under the cap of a mastiff 05' is there some kind of cloth under the cap? i keep getting
some weeping? the seals have been changed twice & the tubes are not bent? can somesone help me ? Pinky

 

[Raywood]

If you've neglected the seals for a long time the Teflon wears off and then starts eating into the chrome on the tubes. Your manual on the 05's says to change every 10,000 miles. I had to get new tubes cause I wore mine through.

Ops, meant bushings not seals

Sent from my DROID RAZR using Tapatalk 2

 

[erldawg]

under the cap of a mastiff 05' is there some kind of cloth under the cap? i keep getting
some weeping? the seals have been changed twice & the tubes are not bent? can somesone help me ? Pinky

When the seals were changed the bushings should have been changed as well.

Also if you're not very careful when installing the new seals you can damage them while slipping the new seals onto the fork tubes. You should tape up the areas of the fork tube (I used duck tape) that have sharp edges (usually the ends of the tubes). Spray the tape with WD and slide the new seals on.