Footpegs
- Thread starter NZBigDog
- Start date
bearman
Active Member
BDM used to sell just the rubber replacements, but right now they are not doing business because of bankruptcy or foreclosure or whatever they are calling it. They may never re-open.
I used Kuryakyn foot pegs but had to get the adapters for them to fit. Mine is a 2006 so I’m not sure if yours would need the adapters or not.
I used Kuryakyn foot pegs but had to get the adapters for them to fit. Mine is a 2006 so I’m not sure if yours would need the adapters or not.
bearman
Active Member
part # 8882 is the adapter needed to fit the Big Dog clevis
Peg Adapters for Big Dog's | Foot Controls | Küryakyn
Then you need some pegs that fit the adapter, I got the Zombie pegs (4471) and promptly overtighened and broke the bolt that holds the peg to the adapter. had to email them and get a replacement bolt. My advice is put it together loosely, install and figure out the angle you want to rotate them, then snug the bolt down enough to hold the peg on the adapter while you remove the bolt and put blue locktite on it. Put it back together and don't overtighten.
You can see the bolt in the installation pics here
http://www.kuryakyn.com/documents/installation/4471-23MC-1212.pdf
Peg Adapters for Big Dog's | Foot Controls | Küryakyn
Then you need some pegs that fit the adapter, I got the Zombie pegs (4471) and promptly overtighened and broke the bolt that holds the peg to the adapter. had to email them and get a replacement bolt. My advice is put it together loosely, install and figure out the angle you want to rotate them, then snug the bolt down enough to hold the peg on the adapter while you remove the bolt and put blue locktite on it. Put it back together and don't overtighten.
You can see the bolt in the installation pics here
http://www.kuryakyn.com/documents/installation/4471-23MC-1212.pdf