Floorboards

[Cruz Dog]

How's it going?Do you by chance know what floor boards I can use on the bulldog bagger. I talked to Derek and Donna and they don't have any floor boards mine took a beating so I need the right side break lever one or if there's any that will work to replace all four floor boards. Any help appreciated or if anyone has an extra one.

 

[Snuffy]

If you find any let me know. I have looked for a while for passenger floorboards but nothing that was a direct fit.my other BigDog had a set made by Cobra but unfortunately they don’t make them anymore unless you have a Harley.

 

[Cruz Dog]

I been looking for some. My cousin is a good fabricator I’ll get with him I’m sure he can figure something out to make something like this work

 

[Jwooky]

I modified my clevis to accept Harley style, then sky is the limit. You can also buy adapters.

 

[Snuffy]

I didn’t know there is adapters for that. How did you modify yours ?

 

[Cruz Dog]

Those look good. Can you talk to me about your modifications and the adapters.?

 

[Mr. Wright]

I can make the adapters for you

 

[Snuffy]

I can make the adapters for you

Is it just spacers ?

 

[Jwooky]

I didn’t know there is adapters for that. How did you modify yours ?

I never liked how far the pegs stuck out, so I completely cut the clevis ears off and through bolted into tapped holes in the floor boards.

That was also why I didn’t like the adapters, it makes them stick out even more.

 

[Mr. Wright]

Is it just spacers ?

Their made out of channel aluminum with an adjustment set screw. It's like a spacer. The pets won't stick out any further.

 

[Snuffy]

Yeah I don’t think I would like that either. Think I will stick to what I have. Thanks for the offer Shannon

 

[Mickmorris]

I never liked how far the pegs stuck out, so I completely cut the clevis ears off and through bolted into tapped holes in the floor boards.

That was also why I didn’t like the adapters, it makes them stick out even more.

Can you post a picture of what you have? Be interested to see. I have a friend who is wanting to switch from pegs to floorboards on his’06 K9

 

[Cruz Dog]

Yes some pictures would be great. I ain’t trying to steal your idea what I’m sure is great production but help would be appreciated. I don’t mind the pegs on the bikes just not a fan of them on the bagger. I was in a motorcycle accident 10 months ago and am now barely starting fixing rebuilding painting the bagger. I have a great painter/fabricator just no great BDM mechanics in my area they are good motorcycle mechanics but you know how that goes floor board is scratched pretty good I’m even thinking of sanding it down back to a smooth surface and doing them black I probably need the foot control shift and by chance does anyone know who can make some heat shields for the Paul Yafee phantom exhaust those got banged up too the fabricator said he can re do my fairing and I did put Harley bags on it the left side bag was fixable I did have to get the right side new bag for it and customizing the attached side cover shouldn’t be to difficult for the fab guy. Fingers crossed. The fork seals neck bearings fork stop shouldn’t be to bad to replace. There is always plenty of help and guidance on here.

 

[Snuffy]

Yes some pictures would be great. I ain’t trying to steal your idea what I’m sure is great production but help would be appreciated. I don’t mind the pegs on the bikes just not a fan of them on the bagger. I was in a motorcycle accident 10 months ago and am now barely starting fixing rebuilding painting the bagger. I have a great painter/fabricator just no great BDM mechanics in my area they are good motorcycle mechanics but you know how that goes floor board is scratched pretty good I’m even thinking of sanding it down back to a smooth surface and doing them black I probably need the foot control shift and by chance does anyone know who can make some heat shields for the Paul Yafee phantom exhaust those got banged up too the fabricator said he can re do my fairing and I did put Harley bags on it the left side bag was fixable I did have to get the right side new bag for it and customizing the attached side cover shouldn’t be to difficult for the fab guy. Fingers crossed. The fork seals neck bearings fork stop shouldn’t be to bad to replace. There is always plenty of help and guidance on here. View attachment 134420

Glad you are ok and able to ride again. Good luck with your rebuild.

 

[Mickmorris]

Yes some pictures would be great. I ain’t trying to steal your idea what I’m sure is great production but help would be appreciated. I don’t mind the pegs on the bikes just not a fan of them on the bagger. I was in a motorcycle accident 10 months ago and am now barely starting fixing rebuilding painting the bagger. I have a great painter/fabricator just no great BDM mechanics in my area they are good motorcycle mechanics but you know how that goes floor board is scratched pretty good I’m even thinking of sanding it down back to a smooth surface and doing them black I probably need the foot control shift and by chance does anyone know who can make some heat shields for the Paul Yafee phantom exhaust those got banged up too the fabricator said he can re do my fairing and I did put Harley bags on it the left side bag was fixable I did have to get the right side new bag for it and customizing the attached side cover shouldn’t be to difficult for the fab guy. Fingers crossed. The fork seals neck bearings fork stop shouldn’t be to bad to replace. There is always plenty of help and guidance on here. View attachment 134420

Damn it Man. So sorry to see & hear about this deal. Glad you are ok. Looks like everything is repairable & that’s a good thing! Best wishes in every aspect.

 

[Mr. Wright]

Yes some pictures would be great. I ain’t trying to steal your idea what I’m sure is great production but help would be appreciated. I don’t mind the pegs on the bikes just not a fan of them on the bagger. I was in a motorcycle accident 10 months ago and am now barely starting fixing rebuilding painting the bagger. I have a great painter/fabricator just no great BDM mechanics in my area they are good motorcycle mechanics but you know how that goes floor board is scratched pretty good I’m even thinking of sanding it down back to a smooth surface and doing them black I probably need the foot control shift and by chance does anyone know who can make some heat shields for the Paul Yafee phantom exhaust those got banged up too the fabricator said he can re do my fairing and I did put Harley bags on it the left side bag was fixable I did have to get the right side new bag for it and customizing the attached side cover shouldn’t be to difficult for the fab guy. Fingers crossed. The fork seals neck bearings fork stop shouldn’t be to bad to replace. There is always plenty of help and guidance on here. View attachment 134420

Send me a picture of the underside of the running board

 

[Jwooky]

Can you post a picture of what you have? Be interested to see. I have a friend who is wanting to switch from pegs to floorboards on his’06 K9

I didn’t take any as I was modifying, sorry.

 

[Cruz Dog]

Thank you all for being glad I’m ok. I’ve been blessed. I’ll probably struggle more trying to get the bike done than I did with the accident. Then again I don’t remember it happening so that’s probably helping. I didn’t realize I had a